<![CDATA[Integrity Staffing Services: jobboards]]>

<![CDATA[Integrity Staffing Services: jobboards]]> https://JOBS.INTEGRITYSTAFFING.NET/ en-us <![CDATA[Painter]]> We have an exciting opportunity Brush and Roll Painters within their coatings department working in Norfolk,VA with one of our Clients in the Ship Repair Industry.

Job Description:

Must also know how to set-up jobs and spraying equipment
Must know how to measure and record DFT and environmental readings
Must be proficient in brush and rolling painting, general house cleaning, or knowledge of all pumping (gas free) procedures
Should be able to troubleshoot equipment to ensure the job progresses
Must be proficient in the requirements of NAVSEA 009-32 standard item
Must have knowledge concerning paint induction times and also have some knowledge of spray painting
Ability to work in confined spaces
Must have knowledge of mixing and application of epoxy and enamel paints
Must know how to use power tools associated with surface preparation and paint removal
Must be SSPC certified in preservation in one of the following: (C7, C12, C13, or C14) or Coast Guard certified in pumping.
May have two or more of the following SSPC certifications: C7, C12, C13, or C14

Hours:

1st Shift 6AM â 245PM
2nd Shift 3PM â 11PM

Pay:

Up to $30 an hour

#ISS

]]> Fri, 05 Jun 2026 00:00:00 EDT 0 <![CDATA[Marine Insulator]]> We have an exciting opportunity for a Marine Insulator position in Norfolk, Virginia!

Qualifications:

Must have a minimum of 2 years of verifiable experience as a Marine Insulator
Must have verifiable experience working with sound dampening tile
Must have experience working with rubber, kalo, fiberglass, pads, and haul boards
Must have OSHA 10 certification
Must be eligible for DBIDS access
Must have ability to read and interpret technical drawings and specifications

Job Duties entail but are not limited to:

Install, remove, repair, and replace acoustic and thermal insulation on piping, machinery, bulkheads, overheads, and ventilation systems aboard ships and submarines
Fabricate and install sound dampening tiles, removable insulation pads, blankets, and lagging systems
Measure, cut, fit, and secure insulation materials including rubber, kalo, fiberglass, mineral wool, calcium silicate, and foam-based products
Apply vapor barriers, jacketing, banding, pins, adhesives, and sealants according to specifications
Read and interpret blueprints, isometric drawings, and technical specifications
Perform work in confined spaces, at heights, and in active shipyard environments

Schedule:

6am-1:30pm Monday-Friday
Must be flexible to work OT and weekends as needed

Pay:

$24-25/hour based on experience

]]> Fri, 05 Jun 2026 00:00:00 EDT 0 <![CDATA[Marketing Assistant]]> Our client in Suffolk, VA is looking for a temporary Marketing Assistant for a new Library.

Job Description:

Hires, trains, supervises, and evaluates subordinate staff in the work to be performed and ensures compliance with library policies and procedures.
Manages the libraryâs various social media accounts and development of the website.
Coordinates with media companies and other resources to obtain cost effective advertising.
Coordinates and participates in special events and initiatives of all sizes.
Performs administrative duties such as preparing and analyzing statistical reports, performing outreach to staff, monitoring discretionary spending of a budget, and delivering trainings and classes as needed.
Prepares statistical and financial reports for the various social media platforms, website, and other tools. Prepares and produces financial/budgetary reports monthly.
Designs, develops, and delivers employee training and development programs through a variety of formats including e-learning, instructor-led classes, and other performance aids; coordinates and oversees the design, development and delivery of such programs/services by library staff.
Identify marketing needs, recommending and implementing solutions, and evaluating and measuring effectiveness.
Coaches and supports employees with developing their skills and improving job performance.
Assesses the success of campaigns, initiatives, tools, resources, and platforms to determine effectiveness to meet strategic goals.
Performs tasks at the circulation desk of the library including checking library materials in and out, preparing books to be shelved, registering and processing library cards, collecting materials for the book depository, and securing the library at the end of the business day.
Directs, advises, provides, assists, and instructs patrons with locating library materials, answering reference and directional questions, and placing reserve requests.
Receives, reviews, and responds to patron complaints.
Monitor and evaluate library public services, facilities and staff in the absence of Library Management.

Hours:

Monday â Friday 830AM â 500PM

Pay:

$26.50 - $28.85/hour

]]> Fri, 05 Jun 2026 00:00:00 EDT 0 <![CDATA[Accounts Payable Specialist]]> New Exciting Opportunity for an Accounts Payable Specialist in Hampton

Qualifications:

1â3+ years of accounts payable or accounting experience
Knowledge of accounting principles and AP procedures
Proficiency in accounting software and Microsoft Excel
Strong attention to detail and organizational skills
Good communication and problem-solving abilities

Job Duties:

Process and verify vendor invoices related to raw materials, equipment, freight, and operating expenses
Match invoices with purchase orders and receiving documents for accuracy
Prepare and process payments via check, ACH, wire transfer, or other methods
Reconcile vendor statements and resolve discrepancies
Maintain accurate accounts payable records and filing systems
Monitor payment schedules to avoid late fees and maximize discounts
Assist with month-end closing activities and AP reconciliations
Prepare journal entries related to accounts payable
Respond to vendor inquiries and maintain positive vendor relationships
Ensure compliance with internal controls, company policies, and tax regulations
Support audits by providing requested documentation and reports
Other duties as assigned

Schedule:

Monday-Friday 7am-3:30pm

Pay:

$50,000-$55,000

]]> Fri, 05 Jun 2026 00:00:00 EDT 0 <![CDATA[IT & Cybersecurity Specialist]]> New Exciting Opportunity for an IT & Cybersecurity Specialist in Hampton

Qualifications:

5+ years in IT and/or cybersecurity in a hands-on role
Direct Experience with NIST SP 800-171 implementation
Strong knowledge of network security and Windows environments
Experience in DOD, defense supply chain or regulated environments
Self-directed with ability to operate without direct staff

Job Duties:

Lead implementation and sustainment of all 110 NIST SP 800-171 controls
Develop and maintain: System Security Plan (SSP) Plan of Action & Milestones (POA&M)
Manage SPRS score and support CMMC Level 2 readiness
Oversee IT security across network, endpoints, and data systems
Implement MFA, access controls, patching, and vulnerability management
Support design and deployment of a secure CUI enclave
Maintain audit-ready documentation and lead assessments
Establish incident response capability and manage cybersecurity risks
Train employees in cybersecurity awareness and CUI handling
Interface with customers, auditors, and external IT/security partners

Schedule:

Monday-Friday 7am-3:30pm

Pay:

$100,000-$140,000

]]> Fri, 05 Jun 2026 00:00:00 EDT 0 <![CDATA[Assembler]]> Job Description for Crating:

Must have wood working experience
Must know how to read a tape measure and use power tools (panel saw, table saw, drills, pneumatic nail guns, etc.)
Previous framing experience is recommended
Must be able to lift 50lbs
Must be able to stand for long periods of time
Prefers someone that is bilingual (Spanish and English)

Hours:

M-F 8-5PM

Pay:

$17.00 & up based on experience/interview

]]> Fri, 05 Jun 2026 00:00:00 EDT 0 <![CDATA[Ultrasonic Testing Inspector 2]]> We have a wonderful opportunity for an Ultrasonic Testing Inspector 2 position in Newport News, VA with one of our Clients in the Ship Repair Industry.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

Should be previously certified to perform volumetric butt corner and tee weld UT inspections in accordance with NAVSEA T9074-A-GIB-010/271
Practical examination of the UT inspection of butt, corner and tee welds
Examination covers the specifications, codes, and acceptance criteria used in the applicable NDT procedure
Practical examination covers inspection performance including calibration, scanning, detection and evaluation of flaws.
All inspectors must have documented qualifications/certification to level II as of ASNT SNT-TC-1A, 2016 edition
Must be able to pass hair follicle drug test

HOURS:

1st Shift-7am-3:30pm
2nd Shift-3:30pm-12:00Am
3rd Shift- 10:00pm-6:00am
Must be open to all shifts

PAY:

$46/Hour based on experience; Per Diem is offered for Non-local

]]> Thu, 04 Jun 2026 00:00:00 EDT 0 <![CDATA[Driver]]> New Exciting Opportunity for a Driver in Newport News

Qualifications:

Ability to safely work without constant supervision
Complies with direction and exhibits strong problem-solving skills
Proficiency in operating heavy equipment including fork trucks and flatbed trucks
Experience with loading/unloading and securing freight
Ability to frequently lift 55lbs
Familiarity with city driving and navigation systems
Understanding of basic warehouse and yard layout
Experience in a construction site delivery plus
Clean driving record for the past 5 years

Job Duties:

Safely operate flatbed trucks to transport goods over short and long distances
Perform routine vehicle inspections and maintenance
Load and unload bulky construction materials by fork truck, dump bed, or manually.
Comply with truck driving rules and regulations as well as company policies
Report any incidents or accidents to the supervisor immediately
Safely operate a fork truck in the act of loading delivery vehicles, loading customer vehicles, and unload inbound materials.
Clean and organize a working warehouse and building materials yard

Schedule:

Monday-Friday 7:00am-4:00pm

Pay:

$20.00-$22.00 per hour

]]> Thu, 04 Jun 2026 00:00:00 EDT 0 <![CDATA[Bank Teller]]> We have an exciting opportunity for a Bank Teller in Virginia Beach Virginia!

Qualifications:

Must have a minimum of 1 year of Customer service, clerical, or cash handling experience.
Must have a minimum of a High School Diploma or equivalent.
Must be able to pass background and credit checks.
Familiarity with Silverlake system is preferred.

Job Duties entail but are not limited to:

Deliver professional customer service in-person, via phone, email, and drive-thru
Process deposits, withdrawals, loan payments, transfers, wires, cashierâs checks, and stop payments
Balance cash drawer and assist with vault and teller operations
Maintain and update customer accounts; verify and process documentation
Answer customer inquiries and promote bank products/services
Support online banking setup and general branch administrative tasks
Collaborate with branch staff and assist with additional duties as needed

Schedule:

Monday-Friday 8am-5pm

Pay:

$19.25-$24/hour based on experience

#ISS

]]> Wed, 03 Jun 2026 00:00:00 EDT 0 <![CDATA[Outside Machinist]]> We have an exciting opportunity for an Experienced Outside Machinist in Portsmouth Virginia!

Qualifications:

Able to obtain DBIDS
Must have a minimum of 3 years experience as an Outside Machinist
Have high school diploma or GED
Experience operating lathes, grinders, boring mills, planers, and portable machining tools preferred.
Must have experience with turning, drilling, tapping, boring, honing, and polishing processes.
Must have the ability to read and interpret blueprints, technical drawings, and precision measuring tools.
Must have the ability to perform basic mathematical calculations including fractions, percentages, ratios, and measurements.
Strong understanding of machining practices and mechanical systems.
Experience with turning, drilling, tapping, boring, honing, and polishing processes.
Large-part machining experience preferred, including ship propulsion shafting and steering gear components.
Strong problem-solving and troubleshooting skills.
Basic computer skills including Microsoft Word and Excel.
Ability to lift, carry, and maneuver tools and equipment in industrial and shipyard environments.

Job Duties entail but are not limited to:

Transport and set up tools, machinery, and fixtures to support machining operations at customer sites and company facilities.
Perform machining operations using portable milling machines, clamshell lathes, line boring systems, grinding machines, hydraulic tensioning systems, and various hand and power tools.
Take accurate measurements using precision measuring equipment.
Properly select, align, secure, and remove fixtures, cutting tools, attachments, accessories, and materials.
Recognize and properly use inserts, tooling, and machining fixtures.
Perform mechanical assembly and disassembly of equipment using hand and power tools.
Read and interpret blueprints, drawings, and work instructions to complete assigned tasks.
Determine proper tools and machining methods required for specific repairs and operations.
Operate lifting devices and material handling equipment as needed.
Communicate with customers and government representatives to coordinate onsite work activities.
Track parts, labor, and jobs using JobBOSS and Travelers systems.
Complete inspection reports and document as-found conditions for completed work.

Schedule:

Monday â Saturday 3pm-11pm

Pay:

$20-$35/hr based on experience

]]> Tue, 02 Jun 2026 00:00:00 EDT 0 <![CDATA[Marine Electrician]]> We have an exciting opportunity for Marine Electrician in Norfolk, Virginia for with one of our Clients in the Ship Repair Industry.

Qualifications:

Must be able to obtain DBIDS
Must have at least five years of experience as a shipboard Electrician in the maritime industry.
Must have OSHA 10 certification
Perform work requiring a thorough knowledge of electrical theory and principles, statutory codes, properties of materials and principles of operation of electrical equipment under direction of supervisor.
Ensure compliance of OSHA, USCG, ABS, U.S. Navy and company safety requirements concerning work assignments
Prepare and install equipment or system alterations in accordance with the technical specifications.
Maintain and repair electrical and electro-mechanical systems of ferries, dredges, and all other marine vessels.
Read and interpret electrical schematics and blueprints, planning, laying-out and installing equipment and cabling.
Place conduit, pipes or tubing, inside designated partitions, walls, or other concealed areas, and pull insulated wires or cables through the conduit to complete circuits between boxes.
Repair/Replace cables and connectors.
Install, maintain, and repair AC and DC generators, switchboards, distribution panels, lighting and alarm circuits, electronic equipment and cables.
Disconnect and reconnect motors and electrical equipment.
Adjust/align or replace components of motors, generators, and alternators such as bearings, centrifugal switches, brushes, diodes, etc.
Install conduit to bulkheads with brackets and screws, using hand tools, and threads wires through conduit to terminals, such as connection boxes, circuit breakers, voltage regulators, and switch panels.
Perform maintenance and repair of generators, switchboards, controllers, circuit breakers, electrical motors, distribution panels, alarm and lighting circuits.
Identify various cables by cable types, number of conductors and wire size.
Remove and install cables found overhead (ceiling), along a bulkhead (wall) or underneath deck (floor)- cable runs may range from a few feet to more than a thousand feet. Assistance during the cable runs varies according to the cable size, length of the run, and physical difficulty.
Test electrical characteristics such as voltage construct instrument panels, using hand tools, rulers, dividers, and power drills, following specification.
Board ships via stairs, ladders, and gangways with tool bags and needed equipment.

Schedule:

Monday-Friday: 6am -2:45pm

Pay:

$24-$32/hour based on experience

]]> Fri, 29 May 2026 00:00:00 EDT 0 <![CDATA[Blaster/Spray]]> We have an exciting opportunity Painters/Blasters in Norfolk,VA with one of our Clients in the Ship Repair Industry.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

High school diploma or equivalent
Minimum of seven years experience with accomplishing Corrosion Control and Preservation in the Marine Industry
Minimum 120 hours of “hands on” experience operating 40K PSI water-jetting equipment.
Minimum 200 hours of “hands on” experience operating 3500 â 5000 PSI pressure washers for cleaning of ships hulls.
Minimum of 800 hours of “hands on” experience with Airless Spray paint application and/or Abrasive Blasting and/or Installation and Maintenance of vessel containment systems.
Must be able to work effectively with others.
Must be a steady, reliable worker.
Must be able to comprehend and follow simple instructions
Prepare all types of surfaces for preservation.
Removes old paint and debris from all types of substrates by; Scraping, Chipping and Sanding.
Operate; 3,000 to 5,000PSI Pressure Washers and wash surfaces to remove grease, rust, scale, and dirt.
Operate 40,000PSI Ultra-High Pressure Water Jetting equipment.
Mix Solvents and Coatings accurately to formula.
Apply coatings in accordance with specifications and good marine practice.
Capable of brush and roll painting for passing all inspection processes
Be familiar with and exercise proper procedures for; painting in confined spaces.
Control costs in assigned area of responsibility.
Complete tasks with little to no supervision
Other duties may be assigned as workload requirements dictate.
Understand and act upon simple instruction
Work independently to complete job assignments
Must have regular, reliable attendance

TOOL REQUIREMENTS:

The following tools are expected to be part of the 1st Class Corrosion Control Technicianâs, employee provided and maintained toolbox:
- Tool bag or Toolbox
- “5 in 1” Painterâs Tool
- Large Wire Brush
- Flashlight
- 25ft. Tape Measure
- Utility Knife (“Box Cutter”)
- Wire Cutter
- Adjustable wrenches (10” & 12”)
- Flat Tip Screwdrivers
- “Channel-lock” Pliers

HOURS:

First shift starts at 6AM and Second shift starts at 3PM. May work 8,10 or 12 hours shifts.

PAY:

Local is up to $28 for 1st Class
Non-Local is up to $23.00 for 1st Class with $120/Per Diem

]]> Fri, 22 May 2026 00:00:00 EDT 0 <![CDATA[Firewatch/Tank Watch]]> Integrity Staffing Services is currently seeking qualified Fire Watch / Tank Watch Personnel to support operations at Norfolk Naval Shipyard (NNSY) in Portsmouth, Virginia. This position supports critical shipboard safety operations aboard U.S. Navy vessels and requires individuals who are dependable, safety-focused, and capable of working in industrial shipyard environments.

Requirements:

Must have or be able to obtain Active Secret Clearance / Red Badge
Must have experience working in confined spaces and industrial shipyard environments
Ability to climb ladders and work aboard ships
Ability to lift and carry up to 50 pounds
Must comply with OSHA, NAVSEA, and NNSY safety standards

Fire Watch Duties:

Monitor hot work areas during welding, cutting, and grinding operations
Maintain constant surveillance for fire hazards and unsafe conditions
Operate and inspect fire extinguishers
Sound alarms and respond to emergency situations if required
Remain on station after hot work completion per safety requirements
Ensure proper use of fire prevention measures and protective coverings

Tank Watch Duties:

Monitor confined and enclosed spaces during entry operations
Maintain entrant accountability and communication logs
Ensure confined space certificates are current and properly posted
Prevent unauthorized entry into restricted spaces
Communicate with personnel working inside tanks and confined spaces
Coordinate emergency response procedures when necessary

Schedule:

Standard Shift Hours:
1st Shift: 7:20 AM â 4:00 PM
Overtime, weekends, holidays, and extended shifts may be required

Pay & Benefits:

Pay Rate: $22.38/hour + $5.09/hour = $27.47/hour
Overtime Potential
Long-Term Opportunity

#ISS

]]> Fri, 22 May 2026 00:00:00 EDT 0 <![CDATA[Scanner Technician]]> Summary of Position

The Scanning Technician operates a high-speed scanning machine to make digitized copies of documents. This position converts paper documents to digital images using scanning equipment.

Essential Duties and Responsibilities

Responsible for the operation of high-speed scanning equipment.
Convert high volumes of hard copy files into quality digital images.
Responsible for verifying the accuracy, clarity and completeness of all digitized documents. To include:
Image Quality: clear and legible text, no blurriness, skewing, proper brightness and contrast, correct page orientation, rotation of images, correct resolution (300 DPI)
Scanned File Completeness: All pages scanned, no missing, duplicated or cut-off pages
Evaluates documents to ensure all output meets strict quality control standards.
Ability to consistently maintain set production quotas.
Highly detailed oriented, with great attention to quality output, data integrity and adherence to a production quota.
Follows all security and privacy policies, standards and guidelines to protect the informational assets of both the company and their customers.
Other duties specified by your Lead/Supervisor

Qualifications

High school diploma or equivalent.
Ability to work independently in a fast-paced environment with minimal supervision.
Proficiency in reading, writing, and communicating in English.
Flexibility to work overtime (OT) or weekends as needed.
Ability to lift 30 - 50 lbs.
Ability to maintain confidential information.
Must have US Citizenship or be a Lawful Permanent Resident
Must have registered with the Selective Service (Males only)
Must be Federal Tax Compliant
Must be able to obtain and maintain a government clearance

Schedule:

Monday-Friday 9am-6pm or 12pm-9pm

Pay:

$23.59/hour ($18.50/hour + $5.09 Health & Wellness)

#ISS

]]> Thu, 21 May 2026 00:00:00 EDT 0 <![CDATA[Tile Mechanic]]> We have an exciting new opportunity for a Tile Mechanic in Portsmouth Virginia!

Qualifications:

Must be able to obtain DBIDS
Must have experience with Ceramic or Composite tile installation, masonry, or hardscape installation
Must be able identify and measure material.
Must be able to calculate basic figures.
Must be able to carry out instructions furnished in oral, written, or diagram form.
Must be able to problem solve, organize, and prioritize work.
Must be able to perform required duties efficiently and independently.

Job Duties entail but are not limited to:

Ensure work is done safely and meets quality standards.
Ability to perform carpentry-type duties to include use of manual tools, power tools, and building of containments.
Read and interpret documents as necessary, such as operating and maintenance manuals, safety rules and regulations, procedure manuals, etc.
May prepare molds and templates for fabrication of hull treatment.
Maintain a clean work environment where coatings work is being performed.
Demonstrate comprehension of complex shapes and the ability to understand symmetrical gaps both parallel and perpendicular to the ships surface shape.
Mixing of different types of solvent and adhesive materials.
Use of troweling tools and adhesives, and work with equipment specific to hull treatment installations
Understanding fairness and flushness with regards to surface preparation.
Follow all company rules and policies.
Provide a great level of attention to detail and focus on the given task.
May be required to perform additional duties as deemed necessary by the Superintendent.
Must be willing to comply with clean shaven standards needed to wear half/full face respirator.
Must be able to pass a thorough background investigation to obtain access into a shipyard environment.

Schedule:

May work 8,10 or 12 hours shifts.
Must be flexible to work OT

Pay:

$20-$26 per hour based on experience

#ISS

]]> Wed, 20 May 2026 00:00:00 EDT 0 <![CDATA[Equipment Operator - Baler]]> Responsible for all activities associated with safely running the baler including operation, cleanup, and recommending improvements to operations.

DUTIES AND RESPONSIBILITIES:

Operate the Baler safely following operating instructions
Make good, neat bales.
Minimum team goal is 7 bales per hour
Maintain accurate bale reports.
Forklift experience is a plus.
Turn in maintenance work orders to supervision for needed repairs. Be proactive in the maintenance of equipment.
Keep warehouse and working areas clean and tidy
Additional duties may be assigned by management.

Hours:

2nd Shift
- 2PM â 1030PM

Pay:

$20.50/hour

#ISS

]]> Tue, 19 May 2026 00:00:00 EDT 0 <![CDATA[Forklift Operator]]> Exciting New Opportunity for Forklift Operators in Newport News and Toano!

Responsibilities:

Unload inbound shipments safely and move product to storage locations. Efficiently stack and store product in the appropriate areas.
Ensure inbound and outbound shipments are accurate and free of damage.
Pull and prepare product for shipment, ensuring that the exact number and type of product is loaded and shipped.
Perform picking duties in an efficient manner that meets customer service standards. Efficiently move product from staging and/or storage areas into rail cars or trailers.
Load, unload, move, stack, and stage product and materials using a forklift, pallet jack, or handcart.
Use radio equipment for picking, receiving, put away, and load functions, as required.

Requirements:

Sitting, Standing, Walking
Heavy lifting: Raising or lowering an object from one level to another Exposure to varied temperatures within warehouse environment
Work inside and outside; work around machinery with moving parts and vehicles
Carrying, pushing, pulling boxes and items; up to 75 lbs

Shift:

Newport News: Monday-Friday 7am-3:30pm and 3:30pm-Midnight
Toano: Monday-Friday 7am-3:30pm

#ISS

]]> Mon, 18 May 2026 00:00:00 EDT 0 <![CDATA[Product Handler]]> New Exciting Opportunity for Product Handlers in Newport News & Toano!

Key Responsibilities:

Duties and responsibilities include but are not limited to the following:
Weighing packages and labeling them appropriately
Inspecting packages to ensure they are not damaged
Inspecting shipping containers to ensure they meet shipping regulations
Assembling daily orders by shipping location or any other shipping categories
Keeping records of packages including delivery notes, invoices, etc.
Filling out packing and order forms with the relevant shipping information
Sealing shipping containers and labeling them appropriately
Cleaning shipping containers and other shipping supplies
Physical requirements and Qualifications:
Sitting, Standing, Walking for long periods of time

Qualifications:

1-2 years of warehouse experience, preferred
Lifting: Raising or lowering an object from one level to another (includes upward pulling)
Ability to read product orders for inventory tracking and processing orders
Good eye-hand coordination and sense of balance required
Exposure to varied temperatures within warehouse environment
Work inside and outside; work around machinery with moving parts and vehicles
Carrying, pushing, pulling boxes and items; up to 75 lbs, at times.

Pay:

$14/hour

Schedule:

First Shift: Monday -Friday 6:30am-3:30pm
Second Shift: Monday- Friday 3:30pm-Midnight

#ISS

]]> Mon, 18 May 2026 00:00:00 EDT 0 <![CDATA[Product Handler]]> New Exciting Opportunity for Product Handlers in Newport News & Toano!

Duties and responsibilities include but are not limited to the following:

Weighing packages and labeling them appropriately
Inspecting packages to ensure they are not damaged
Inspecting shipping containers to ensure they meet shipping regulations
Assembling daily orders by shipping location or any other shipping categories
Keeping records of packages including delivery notes, invoices, etc.
Filling out packing and order forms with the relevant shipping information
Sealing shipping containers and labeling them appropriately
Cleaning shipping containers and other shipping supplies
Physical requirements and Qualifications:
Sitting, Standing, Walking for long periods of time

Qualifications:

1-2 years of warehouse experience, preferred
Lifting: Raising or lowering an object from one level to another (includes upward pulling)
Ability to read product orders for inventory tracking and processing orders
Good eye-hand coordination and sense of balance required
Exposure to varied temperatures within warehouse environment
Work inside and outside; work around machinery with moving parts and vehicles
Carrying, pushing, pulling boxes and items; up to 75 lbs, at times.

Pay:

$14/hour

Schedule:

First Shift: Monday -Friday 6:30am-3:30pm
Second Shift: Monday- Friday 3:30pm-Midnight

#ISS

]]> Fri, 15 May 2026 00:00:00 EDT 0 <![CDATA[Electronic Assembler]]> Job Description:

Ability to assemble electro-mechanical assemblies, electrical enclosures, cables, and wire harnesses using a variety of tools including, but not limited to: crimpers, wire strippers, soldering irons, and multimeters in accordance with technical data package, work instructions (written or verbal), and industry standards
Skills and ability to perform point to point wiring and equipment installs for commercial and ruggedized enclosures while employing proper cable grooming techniques
Read, comprehend, and interpret drawings, wire lists, diagrams, blueprints, specifications, work orders and reports.
Ability to troubleshoot and/or test wiring, subassembly, and other electronic assemblies.
Perform basic technical documentation including creating redlines and experience working as an assembler utilizing drawings, wire lists, diagrams, blueprints, specifications, work orders, and reports, as well as a variety of tools in accordance with technical data package and work instructions; performing point to point wiring, building various cables and assemblies, quality inspections, testing, and troubleshooting.
Ability to communicate clearly and concisely in both a verbal and written format, including proficient use of computer-based communication software
Keen attention to detail and accuracy
Collaboration skills; Ability to work in a team environment
Capable of reading and understanding technical documents and safety manuals
Knowledge, Skills, and Abilities pertaining to a variety of tools, hardware, and processes
Knowledge of industry or relatable skills/knowledge
Advanced problem-solving skills/experience with recommended solutions.

Educational Requirements (or equivalent):

High School â Electronics experience/training and/or IPC-A-620, IPC-A-610, and IPC-J-STD-001 certified.

Pay:

$18-$22.00 per hour

Schedule:

8am-4pm Monday-Friday

#ISS

]]> Fri, 15 May 2026 00:00:00 EDT 0 <![CDATA[Welder]]> Our client in Virginia Beach, VA is looking for Combo Welders. You will be joining a team at a quickly growing company that has tremendous job opportunity in an Industrial setting.

Requirements/Qualifications:

Must have 1-3+ years of commercial welding experience
Work 40 hour work week, overtime as required
Perform welding duties using MIG, TIG, Wire Welder, Spot Welder and/or oxy/acetylene torch.
Basic mathematical skills and knowledge in use of measurement tools
MIG Welding Certification Preferred
TIG Welding Certification a plus
Vocational/Prior Welding Education a Plus

Duties/Responsibilities:

Clean and dress welds as required
Set up and lay out work using material handling equipment or hand layouts to fabricate or rework finished products.
Manual set up of hand held sanders, grinders, wire wheels or other finishing hand held tools.
Welding I-Beam, Frame and Fuel Tanks in flat, vertical or overhead positions.
Clamp, hold, tack weld, drill, mill, tap, cut and/or bolt together components to obtain required configuration and positions for complete welding process.
Inspect products, equipment and tools for defect and malfunction.
Create quality welds according to blue prints/specifications.
Inspect all welds and re-work as necessary.
Change wire and gas on weld machine as necessary.
Ensure equipment properly set up and used in a safe manner during welding process.
Maintain welding equipment and machines, inspect regularly and request maintenance as needed.
Assist/participate in fuel tank pressure testing as required and rework as necessary.
Perform work to timely standard and quality expectations.

Hours:

Day Shift: Monday â Friday 8AM until 430PM
Night Shift: Monday â Thursday 5PM â 330AM

Pay:

Day Shift: $18 - $20/Hour
Night Shift: $20.70 - $23/Hour

#ISS

]]> Fri, 15 May 2026 00:00:00 EDT 0 <![CDATA[Operations Technician]]> We have an exciting new opportunity for an Operations Technician in Norfolk, Virginia!

Qualifications:

Must have a minimum of 1 year experience in Industrial or plant operations, Material handling, Warehouse or production environments, Mechanical aptitude positions, Safety-sensitive work environments
Must have the ability to read, write, and communicate in English.
Must have basic math skills and calculator use.
Must have basic knowledge of how to use Microsoft Excel
Strong attention to detail and documentation accuracy.

Job Duties entail but are not limited to:

Need to Shake and scrape belts of machinery to unclog coal to ensure it is flowing properly
Document and tag readings from machinery in Word and Excel
Monitor equipment ensuring that everything is operating properly
Clean equipment and machinery at the end of the shift to ensure workspace is ready for next shift

Schedule:

Must be flexible on schedules- Schedules rotate monthly
Three 12 hour shifts and One 6 hour shift weekly

Pay:

$18-$20/hr based on experience

#ISS

]]> Fri, 15 May 2026 00:00:00 EDT 0 <![CDATA[Forklift Operator]]> Exciting New Opportunity for Forklift Operators in Newport News and Toano!

Responsibilities:

Unload inbound shipments safely and move product to storage locations. Efficiently stack and store product in the appropriate areas.
Ensure inbound and outbound shipments are accurate and free of damage.
Pull and prepare product for shipment, ensuring that the exact number and type of product is loaded and shipped.
Perform picking duties in an efficient manner that meets customer service standards. Efficiently move product from staging and/or storage areas into rail cars or trailers.
Load, unload, move, stack, and stage product and materials using a forklift, pallet jack, or handcart.
Use radio equipment for picking, receiving, put away, and load functions, as required.

Requirements:

Sitting, Standing, Walking
Heavy lifting: Raising or lowering an object from one level to another Exposure to varied temperatures within warehouse environment
Work inside and outside; work around machinery with moving parts and vehicles
Carrying, pushing, pulling boxes and items; up to 75 lbs

Shifts/Locations:

Newport News: Monday-Friday 7am-3:30pm and 3:30pm-Midnight
Toano: Monday-Friday 7am-3:30pm

Pay:

$18.60/hour

#ISS

]]> Fri, 15 May 2026 00:00:00 EDT 0 <![CDATA[Forklift Operator]]> Job Description

Prefers at least 2-3 years of experience on a sit down forklift
Reach truck experience is a plus
Pick/pack orders for ground shipment (ability to lift up to 50 lbs., unassisted)
Prepare receiving paperwork for incoming cargo to give to office staff
Clean warehouse areas using broom, dust pan, etc.
Palletize boxes onto pallet and shrink wrap
Hand unload containers that are floor loaded

Hours:

M-F 8AM â 5PM

Pay

Starts at $17/hour

]]> Thu, 14 May 2026 00:00:00 EDT 0 <![CDATA[Material Support Clerk]]> Experience:

Candidates must be able to bend, stoop, lift, manipulate, and place different types of material (pipe, fittings, vent, valves, insulation etc.) up to 50 lbs, and deliver to open spaces, confined spaces, and/or spaces at extreme heights onboard ship.
Must be able to walk, climb, crawl, bend, squat, and stand 8 hours per day and work in various work environments.

Required Skills:

Read, write, basic mathematics, customer service oriented, energetic, dependable, reliable.
Some knowledge of material storage and material picking systems.
Computer skills
Stocking experience
Warehouse management experience
Logistics experience

Pay:

$20.66 - $27.31/hour

Hours:

Must be open to any shift

#ISS

]]> Wed, 13 May 2026 00:00:00 EDT 0 <![CDATA[Production Technician]]> We have an exciting opportunity for a Production Technician position in Norfolk Virginia in a climate-controlled environment!

Qualifications:

Must be able to pass a thorough background check with no offenses
Able to move/Lift up to 35 pounds
Sit/stand for extended periods of time
Must be Highly Detail Oriented
Must have the ability to read and execute work instructions
Previous manufacturing experience preferred
Knowledge and basic understanding of: LEAN ideology & GMP is preferred

Job Duties entail but are not limited to:

Inspecting manufactured product
Packing manufactured product
Labeling manufactured product
Testing manufactured product
Manufacturing product
Ensure all products meet safety, quality and efficiency standards required

Schedule:

Monday-Friday 2pm-10:30pm

Pay:

$16/hour

]]> Wed, 13 May 2026 00:00:00 EDT 0 <![CDATA[Industrial Maintenance Technician]]> We are seeking an Industrial Maintenance Technician to join our team on a contract-to-hire basis in Virginia Beach. In this role, you will be responsible for troubleshooting, repairing, and maintaining industrial manufacturing equipment and facility systems within the USM manufacturing environment.

Key Responsibilities:

Troubleshoot and repair CNC machines, lathes, mills, conveyors, compressors, and facility systems
Perform mechanical and electrical troubleshooting safely using Lockout/Tagout procedures
Conduct preventative maintenance on machinery and building systems
Read and interpret schematics, manuals, and flow charts
Troubleshoot motors, lighting, industrial power systems, and controls
Support facility maintenance including plumbing, lighting, and HVAC systems
Operate forklifts and lifts safely as needed
Ensure compliance with safety and regulatory standards regarding manufacturing and assembly equipment

Required Qualifications:

Hands-on industrial maintenance experience required
Strong mechanical and electrical troubleshooting skills
CNC maintenance experience preferred
Comfortable working independently and within a team environment
Familiarity with industrial safety standards and Lockout/Tagout procedures
Strong mechanical aptitude and reliability
Experience using Microsoft Office preferred
Ability to use basic metrology equipment such as calipers and micrometers
Understanding of mechanical alignment fundamentals
Comfortable working at heights using scissor lifts or boom lifts as needed

Schedule:

Monday â Friday, 7:00 PM â 3:30 AM
Training will take place on First Shift (7:00 AM â 3:30 PM) for approximately 6 months

]]> Mon, 11 May 2026 00:00:00 EDT 0 <![CDATA[Machine Operator]]> Duties & Responsibilities:

Operating a sort machine in a fast-paced production-based environment
Responsible for filling out safety checklists/production logs/ quality logs on time and with accuracy
Work in accordance with a quality system that is compliant with the clients standard and in compliance with SQF standard
Have the ability to lift 55 lbs. consistently throughout the day
Establish an effective line of communication with peers and management
Perform a clean as you go method on production floor and good housekeeping practices
Sort a minimum of 10,000 tier sheets per 8-hour shift

Skills and Knowledge preferred:

• Knowledge of transport packaging and production-based warehouse environment

• Food safety knowledge

• Knowledge of 5s lean manufacturing

• Ability to operate sort machine at a high level thought out the day stay in sync with customer production levels

• Able to perform in a fast-paced work environment while multi-tasking

• Able to perform effective verbal communication between associates and customers

Job Requirements:

• At least 2 years previous warehouse experience in a fast-paced warehousing environment

• At least 2 years previous production-based work

• Ability to provide an effective line of communication

Hours:

1st Shift
- M-F 6AM â 230PM
2nd Shift
- M-F 2PM â 10PM

Pay:

$18.00 - $18.50/hour

]]> Mon, 11 May 2026 00:00:00 EDT 0 <![CDATA[Assembly Mechanic]]> We have an exciting opportunity for Assembly Mechanics in Virginia Beach, VA with one of our manufacturing clients. If you're someone who thrives in a fast-paced environment, values organization, and takes pride in getting the job done right, we want to hear from you.

JOB DETAILS:

Assemble the components such as: valves, piping, instrumentation, vessels and pumps into a single Vacuum Pump System
Operate industrial sit-down forklifts while maintaining daily inspection sheets
Weld carbon steel piping, weld and fabricate structural modifications
Prepare time, production and inventory records as required
Maintain qualification and management authorization to work within the limited approach boundary of electrically energized circuits
Verify safe electrical wiring of pumps and systems prior to energizing circuits for test
Install appropriate boundaries and signage for affected employees prior to energizing electrical circuits
Electrically energize circuits for pumps and systems to record amperages and voltages as necessary

EXPERIENCE:

High School Graduate or GED: Required
Associateâs degree: Preferred
2 plus years of experience in heavy industrial assembly or equivalent trade school:
1 plus years of experience in hands-on assembly or service of vacuum systems or
related equipment and at least 1 year of related warehousing experience
Ability to read and understand complicated mechanical drawings/specifications,
measurement instrumentation and gauges
Proficiency in Microsoft Office (Word & Excel)
Maintain a Driver's License that meets Busch insurance standards

HOURS:

M-F 7:00am-3:30pm

PAY:

$20-$24/hour

]]> Mon, 11 May 2026 00:00:00 EDT 0 <![CDATA[Strategic Sourcing Manager]]> We have an exciting opportunity for a Strategic Sourcing Manager position in Chesapeake Virginia!

Qualifications:

Must have a Bachelorâs degree in a related field with 7+ years of relevant experience, or high school diploma with 10+ years of direct strategic sourcing experience
Minimum 5 years of experience in the marine and/or defense industry with vendor sourcing and management responsibilities
Possess strong knowledge of U.S. government and defense shipbuilding supply chains
Experience managing vendor and parts data within ERP systems (e.g., Deltek Costpoint)
Must be proficient in Microsoft Office Suite
Ability to lead teams, solve complex problems, and manage multiple priorities effectively
Strong communication, critical thinking, and organizational skills

Job Duties entail but are not limited to:

Develop and execute strategic sourcing and purchasing activities to meet company performance goals
Identify, vet, qualify, and manage vendor relationships, including long-term agreements, subcontracts, and purchase orders
Supervise and support a team of buyers, ensuring performance, accountability, and professional development
Coordinate with Business Development, Program Management, Product Development, and Supply Chain teams to support sourcing strategies and mitigate vendor risks
Collaborate with corporate supply chain teams on vendor selection, evaluation, and process development
Review requisitions and purchase orders for accuracy in pricing and lead times prior to issuance
Expedite materials and services to ensure timely delivery and operational support
Maintain vendor performance metrics, records, and reporting (e.g., on-time delivery, open orders, small business reporting)
Manage parts master data, including creation and maintenance within ERP systems
Support vendor audits, compliance requirements, and resolution of non-conformities in coordination with QEHS
Ensure adherence to export compliance policies and supply chain procedures

Schedule:

8am-5pm Monday-Friday

Pay:

$97,000 to $140,000/year based on experience

Company Benefits Include:

Medical and Dental Insurance
Vision
HSA and FSA
Life/AD&D/Disability/Critical Illness/Accident/Hospital Indemnity
Paid Time Off
Employee Assistance Program (EAP)
Medicare Education
401(k) Retirement Plan

#ISS

]]> Fri, 08 May 2026 00:00:00 EDT 0 <![CDATA[Marine Carpenter]]> Position Summary:

Marine Carpenter is an entry-level skilled trades position responsible for assisting in the construction, repair, and installation of basic access and support structures aboard vessels and in the shipyard. This role requires fundamental carpentry skills, the ability to safely use hand and power tools, and the ability to accurately measure, cut, and assemble materials.

Key Responsibilities:

Assist in building and installing simple support and access structures (e.g., temporary enclosures, decking, support, staging access, basic framing such as a “doghouse” structure).
Measure, cut, and assemble wood and other materials using hand tools and power tools safely.
Maintain a clean and safe work environment in accordance with shipyard safety standards

Qualifications:

6 months of carpentry, construction, or related experience
Ability to use a level and ensure plumb/straight construction.
Basic understanding of carpentry principles (cutting, fastening, framing).
Read and follow basic drawings, sketches, and work instructions.
Use measuring tools (tape measure, square, level) to ensure accuracy and proper alignment.
Work alongside higher-level carpenters and supervisors to complete assigned tasks.
Handle material movement, staging, and preparation as needed.
Physically able to lift 40-50lbs, climb, bend, and work in confined or highly elevated spaces. Comfortable working in varying weather conditions, exposure to noise, and industrial hazards.
Safety-conscious mindset

Pay:

$21.00-24.00/hour

Schedule:

Monday-Friday 6am-2:30pm

#ISS

]]> Fri, 08 May 2026 00:00:00 EDT 0 <![CDATA[Carpenter]]> Position Summary:

A Commercial Carpenter is responsible for building and assembling structural frameworks and interior systems for a commercial building. Duties include reading blueprints, laying out and constructing metal framing, installing sheathing, drywall, doors, windows, and basic finish work. Carpenters ensure all work meets project specifications, safety standards, and building codes while collaborating with other trades on-site. The role requires strong knowledge of construction methods, proficiency with hand and power tools, and the ability to work in a fast-paced job site environment

Key Responsibilities:

Read and interpret blueprints, drawings, and project specifications
Measure, cut, and assemble metal framing
Install walls, floors, ceilings, and structural components
Hang drywall, doors, windows, and basic finish carpentry elements
Layout job site materials and ensure accurate placement of structures
Operate hand tools and power tools safely and efficiently
Follow all OSHA and job site safety regulations
Collaborate with project managers, supervisors, and other trades
Inspect work to ensure compliance with building codes and quality standards
Maintain a clean, organized, and safe work environment

Qualifications:

2+ years of commercial carpentry experience (new construction preferred)
Ability to read and interpret blueprints and construction drawings
Strong knowledge of framing, drywall, and general carpentry techniques
Proficient with hand tools, power tools, and measuring equipment
Understanding of building codes and job site safety
Ability to lift 50+ lbs and work in physically demanding conditions
Reliable transportation and ability to travel to job sites as needed
Strong attention to detail and problem-solving skills
Ability to work independently and as part of a team
Must have a REAL ID

Pay:

ranges from $23.03 - $28.00/hour

Schedule:

Monday-Friday 7am-3:30pm

#ISS

]]> Thu, 07 May 2026 00:00:00 EDT 0 <![CDATA[Welder]]> We have an exciting opportunity for Welding positions in Newport News, Virginia!

Job Duties entail but are not limited to:

Welding 5/16” thick dry dock cell wall plate after fit with single bevel groove welds flush
Welding either FCAW (Flux-core) or SMAW (Stick)
Grinding and cleaning any imperfections
All welds will be visually inspected
Must have experience using 60ft Ariel Boom Lift
Lift, carry, push and pull at least 80lbs
Help stock materials in and around the worksite
Help take trash off of the worksite

Qualifications:

Must have at least two years of SMAW and FCAW
Must be able to pass a plate test provided by Client in Suffolk, VA
Must have at least one year of shipyard experience
Must have at least two years of welding experience

Schedule:

Monday-Friday 6am-2:30pm
Overtime could be required on Saturday and Sunday

Pay:

Up to $30/hour

#ISS

]]> Tue, 05 May 2026 00:00:00 EDT 0 <![CDATA[Firewatch]]> We have an exciting opportunity for a Firewatch position in Newport News, Virginia!

Job Duties entail but are not limited to:

Firewatch will assist hot work mechanics to look for incept stage fires and extinguish.
Must be able to climb/work from various heights (5 to 50 Ft.)
Lift, carry, push and pull at least 80lbs
Help stock materials in and around the worksite
Help take trash off of the worksite

Qualifications:

Must have at least one year of shipyard experience

Schedule:

Monday-Friday 6:30am-4pm
Saturday 6:30am-2:30PM
Overtime could be required on Saturday and Sunday

Pay:

$20/hour

#ISS

]]> Mon, 04 May 2026 00:00:00 EDT 0 <![CDATA[Structural Welder (Offsite)]]> We have an exciting opportunity for a Structural Welder position in Newport News, VA with one of our Clients in the Ship Repair Industry.

Qualifications:

3-4 years of Structural Welding experience
Must be able to pass the Mig pulse test
Copper nickel experience
SMAW, GMAW, FCAW GMAW-P experience
Must be able to weld in all 3 positions (horizontal, overhead, and vertical)
Heating-Oxygen/propane heating torch
Air Carbon Arc Gouging
Fillet and butt welds
Can work in confined spaces and heights

Hours:

1st Shift-7am-3:30pm
2nd Shift-3:30pm-12:00Am
3rd Shift- 10:00pm-6:00am
Must be open to all shifts

Pay:

$45 Hr
$135 Per diem if you qualify

#ISS

]]> Fri, 01 May 2026 00:00:00 EDT 0 <![CDATA[Shipfitter - Advanced]]> We have an exciting opportunity for an Advanced Shipfitter position in Newport News, VA with one of our Clients in the Ship Repair Industry.

Qualifications:

Multi Pass tack welding
Must be able to Stick weld, 12 inch stick weld
Must be able to pass hair follicle drug test
Burning Oxygen/Propane burning torch
Heating Oxygen/propane hating Torch
Blueprint readings
Comprehend fractional dimensions
Air Carbon arc Gouging
Grinder and needle gun
Ability to comprehend complex structural assembly drawings, and sketches to include symbols, material type, datum and reference lines

Hours:

1st Shift-7am-3:30pm
2nd Shift-3:30pm-12:00Am
3rd Shift- 10:00pm-6:00am
Must be open to all shifts

Pay:

$45 Hr
$135 Per diem if you qualify

#ISS

]]> Fri, 01 May 2026 00:00:00 EDT 0 <![CDATA[Outside Machinist]]> We have an exciting opportunity for Outside Machinists at Norfolk Naval Shipyard in Portsmouth, Virginia with one of our Clients in the Ship Repair Industry.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

Must hold active security clearance
Must have 6 or more years of experience as a marine outside machinist
Dry dock experience on shafts, rudders, stabilizers and propellers is preferred.
Disassembles of various types of equipment and machinery common to maritime vessels and/or general industry including but not limited to pumps, valves, winches, gear boxes.
Assist in determining repairs and required to bring equipment to rebuild status.
Must be able to lift, carry and transport heavy equipment and boxes
Experience with valve overhaul and hull inserts
Installation of lift check valve
Testing main engines
Hydrostatic testing
Lube and oil flushing
Air conditioning hydro
Installation of valve and pump packing
Install turbine
Install boiler tube replacement
Fit and blue check liners
Install steam valves
Installation of hydraulic systems
Shafting and bearing work
Blueprint reading

HOURS:

May work 8,10 or 12 hours shifts determined by the project.

PAY:

$30 Hr +

#ISS

]]> Wed, 29 Apr 2026 00:00:00 EDT 0 <![CDATA[Pipe Welder]]> We have an exciting opportunity for a Pipe Welder position in Portsmouth Virginia!

Qualifications:

Have at least 2+ years of pipe welding experience in a marine environment
Must be able to operate manual or semi-automatic welding equipment to fuse copper and nickel segments, using processes such as open root and TIG fillet
Able to weld components in flat, vertical, or overhead positions.
Must be DBIDS Eligible
OSHA 10 Required
Knowledge, or experience and must pass qualification test for each process
Knowledge of a range of welding principles, processes, and techniques requiring complete penetration and fusion of base and filler metals.
Ability to maintain dimensions and tolerances to specifications, weld parts and structures that vary in size, shape and thickness.

Job Duties entail but are not limited to:

Use hand-welding or flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.
Ignites torches or start power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits.
Clamps, holds, tack-welds, heat-bends, grinds and/or bolts component parts to obtain required configurations and positions for welding.
Detects faulty operation of equipment and/or defective materials and notify supervisors.
Monitors the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking, distortion, or expansion of material.
Recognizes, sets up, and operates hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment.

Schedule:

Monday-Saturday 6am-2:45pm
Must be flexible on hours

Pay:

$28-$34/hr based on experience

]]> Wed, 29 Apr 2026 00:00:00 EDT 0 <![CDATA[Inside Machinist]]> We have an exciting opportunity for Inside Machinists in Chesapeake, Virginia for with one of our Clients in the Ship Repair Industry.

Qualifications

Must possess OSHA 10 certification
Must have a minimum of six (6) years of experience as an Inside Machinist in a shipyard, industrial, or defense manufacturing environment.
Must have journeyman-level skill with the ability to perform all machining tasks independently and without supervision.
Must be proficient in manual and CNC machining operations, including setup, programming, and operation.
Strong ability to interpret and work from complex blueprints, drawings, and technical manuals.
Expertise in machining a variety of materials and achieving tight tolerances and required surface finishes.
Working knowledge of feed and speed rates and machining characteristics of metals, alloys, and composites.
Ability to fabricate and use fixtures, jigs, and tooling as needed for custom parts.
Job Duties Include but not limited to
Set up and operate a variety of manual machine tools (lathes, mills, grinders, saws, etc.) to manufacture and repair mechanical components.
Program, set up, and operate CNC machines (lathes and mills) for precision machining operations.
Read and interpret blueprints, technical drawings, and specifications to determine dimensions, tolerances, tooling, and setup requirements.
Select appropriate cutting tools, speeds, and feeds for various materials and machining operations.
Measure, mark, and lay out workpieces to ensure accurate machining and assembly.
Use precision measuring instruments such as micrometers, calipers, height/depth gauges, and dial indicators to verify conformance to specifications.
Manufacture or modify parts from stock materials in accordance with engineering drawings and standards.
Maintain proper documentation of measurements, machining data, and work performed.
Maintain equipment and work areas in a clean, organized, and safe condition.

Hours:

First Shift: 6am-4:30pm
Second Shift: 4am-2:30pm
Schedule: Mandatory 50-hour work week (5 days × 10 hours)

Pay:

Pay starts at $35/hour

#ISS

]]> Wed, 29 Apr 2026 00:00:00 EDT 0 <![CDATA[Production Worker]]> Job Purpose:
The Production Associate â Sorter is responsible for processing donated goods efficiently and accurately to ensure high productivity, a safe work environment, and a strong customer experience. Items are evaluated for quality and routed for resale or recycle according to company standards.

Key Responsibilities:

Sort donated materials from carts while maintaining productivity standards
Make quick quality and cleanliness decisions on merchandise
Properly separate usable items into designated departments; route non-usable or recyclable items as directed
Sort a variety of goods including clothing, linens, accessories, shoes, and household items
Move and stage carts safely; request assistance as needed
Maintain a clean and hazard-free workstation
Demonstrate awareness of brand-name merchandise
Assist team members and other departments as needed

Physical Requirements & Work Environment:

Ability to stand, bend, reach, and lift up to 20 lbs. for extended periods
Work performed in a warehouse with concrete flooring
Role involves handling used items that may require use of personal protective equipment (PPE) such as gloves or masks when needed
Must maintain a neat, safe, and organized work area at all times

Pay:

$15.00/hour

Schedule:

Monday â Friday, 7:30 AM â 3:30 PM

]]> Wed, 29 Apr 2026 00:00:00 EDT 0 <![CDATA[Electrical AV Technician]]> Job Description

The Electrical and AV Systems Technician is responsible for the installation, programming, testing, troubleshooting and maintenance of the AV, Network and Electrical Systems during the production and service of all Coach units. This position requires regular hands-on work running cable, connecting components and performing quality control testing.

Essential Duties and Responsibilities:

Installation of A/V, Network, and Electrical Systems, to include running wiring
Loading of programming of coach control system software on coaches
QC testing of the coach AV controls
Updating of AV components
Trouble-shooting of AV issues
Identifying and updating programming of the coach control systems

Qualifications and Education Requirements:

Proven knowledge of luxury motorhomes and the operations of their electrical and AV equipment acquired from hands on experience
Formal training of automation systems from AMX, Spyder, RTI, Crestron preferred
Formal training in networking preferred
1-3 Years of experience implementing new AV and electrical automation systems
Knowledge of network and canbus systems
Knowledge of home automation systems

Equipment Used:

Standard office equipment; computer, printer, fax, multi-line phone
Wire cutters
Wire strippers
Data and coax crimpers and strippers
Electrical meters
Basic test equipment

Physical Requirements:

Ability to manually move, lift, carry, pull or push objects weighing up to 50lbs.
Ability to work within small spaces; coach underbays, behind cabinetry
Repetitive use of arms, hands and fingers.
Prolonged stooping, kneeling, walking and standing.
Close vision, distance vision, peripheral vision, depth perception and ability to adjust focus.
Ability to ascend/descend, work atop and use stairs/ladders
Ability to work in enclosed/tight spaces, and on secured motorhome roofs at various heights.

Experience:

Audio Visual: 3 years (Required)
Woodworking: 2 years (Required)
Electrical: 2 years (Required)
Network support: 1 year (Required)
Power tools: 3 years (Required)

Schedule:

10-hour shift
Monday- Thursday 7am-5:30pm with possible OT on Fridays
Ability to travel â up to 5%

Pay:

$19-22/hour

]]> Fri, 17 Apr 2026 00:00:00 EDT 0 <![CDATA[Pipefitter]]> We have an exciting opportunity for a Pipefitter position in Norfolk Virginia!

Qualifications:

Must be eligible to obtain DBIDS.
Minimum of 5 years of ship pipefitting experience, preferably in ship repair or industrial environments
Must have a high school diploma or equivalent; technical training or apprenticeship preferred
Strong ability to read and interpret complex piping drawings and schematics
Must have Advanced knowledge of piping systems, materials, and fabrication techniques
Experience with welding processes and pipe welding preparation
Ability to perform physically demanding work in industrial environments, including confined spaces and elevated areas

Job Duties entail but are not limited to:

Fabricate, assemble, install, and repair shipboard piping systems including hydraulic, pneumatic, fuel, water, steam, VCHT, and CHT systems
Interpret complex blueprints, isometric drawings, and technical specifications
Perform advanced pipe layout, cutting, threading, bending, and fit-up
Install valves, hangers, supports, and associated piping components
Conduct pressure testing, leak detection, and air/hydrostatic testing
Diagnose and troubleshoot piping system issues and perform necessary repairs
Plan work sequences, materials, and execution to meet project schedules
Coordinate work with welders and other trades to ensure proper system integration
Lead and mentor junior pipefitters and apprentices, providing technical guidance
Ensure all work complies with applicable codes, standards, and safety regulations (including OSHA)

Schedule:

Monday-Friday 6am-2:45pm

Pay:

$27-$33/hour based on experience

]]> Fri, 17 Apr 2026 00:00:00 EDT 0 <![CDATA[CNC Mill Machinist]]> Our client is seeking an experienced CNC Mill Machinist to join their growing manufacturing team. This role is responsible for setting up, programming (if applicable), and operating CNC milling machines to produce precision parts in accordance with engineering drawings and specifications.

Qualifications:

Must have at least 5+ years of CNC milling experience in a manufacturing environment
Must have experience with CAM software (e.g., Mastercam, Fusion 360, or similar)
Must have experience working with a variety of materials (steel, aluminum, stainless, etc.)
Strong knowledge of G-code and CNC machine operations
Experience with setup and editing programs (programming experience a plus)
Ability to read and interpret blueprints and specifications
Familiarity with precision measuring tools (micrometers, calipers, gauges)
Experience holding tight tolerances (+/- .001 or better)
Strong problem-solving skills and attention to detail
Ability to work independently and as part of a team

Key Responsibilities:

Set up and operate CNC milling machines (3-axis and/or 5-axis preferred)
Interpret blueprints, technical drawings, and GD&T requirements
Select appropriate tooling, speeds, and feeds for materials and job requirements
Perform first-piece inspections and in-process quality checks
Adjust machine offsets and tooling to maintain tight tolerances
Deburr, finish, and inspect completed parts to meet quality standards
Maintain accurate production and inspection records
Perform routine machine maintenance and troubleshooting
Collaborate with programmers, supervisors, and quality personnel

Schedule:

Monday â Thursday, 6:00 AM â 4:30 PM
Friday, 7:00 AM â 11:00 AM

Pay Range:

$35.00 â $40.00 per hour (based on experience)

#ISS

]]> Tue, 14 Apr 2026 00:00:00 EDT 0 <![CDATA[Shipfitter]]> We have an exciting opportunity for Shipfitters in Norfolk,VA with one of our Clients in the Ship Repair Industry.

1st, 2nd, and 3rd Class

Qualifications:

Minimum of 4-5 years of Fitting experience
Must pass tack test
Technical training preferred
Knowledge of and ability to use hand tools and instruments associated with the Fitting trade
Must be able to work effectively with others
Comprehend blueprints, sketches, and templates.
Enter and move through manholes to reach and work internally confined spaces
Must take & pass tack weld test

Responsibilities:

Template creation
Working with presses, floor shaping, forming plates, shaping from templates, marking symbols, doors, hatches and scuttles, rolls, presses and blacksmith shop
Laying out blueprints, checking and fitting materials, tack welding of small assemblies, aluminum and steel foundations and outfitting items
Laying out blueprints, checking and fitting materials, tack welding of various sub-assemblies peculiar to the panel line and shell area such as: decks, bulkheads, side shells.
Installation of structural outfit items, doors, ladders, foundations
Effective sequencing of assembly and fitting
Correct use of heating torches in plate heat straightening and shrinkage
Ability to use hand and power tools
Shop and field fabrication
Adherence to industry codes, regulations and specifications
Comprehend blueprints, sketches, and templates
Tack welding
Install simple systems without templates and blueprints
Riveted joint repairs
Read and understand the Chemist and Competent Persons reports and determine if job sites, particularly those involving combustible material, are safe for personnel and hot work
Other duties as assigned
Will be required to wear personal protective equipment- hard hat, safety glasses, steel toe boots/shoes and, when necessary, respirator
Work independently to complete responsibilities
Must have regular, reliable attendance

Hours:

1st Shift â Starts at 6AM â may work 8,10 or 12 hour shifts
2nd Shift â Starts at 3PM â may work 8, 10 or 12 hour shifts

Pay:

Local - Up to $30/Hour depending on experience

]]> Thu, 02 Apr 2026 00:00:00 EDT 0 <![CDATA[Structural Welder]]> We have an exciting opportunity for Structural Welders in Norfolk,VA with one of our Clients in the Ship Repair Industry.

Qualifications:

Minimum 4-7 years of experience
Must be able to demonstrate ability to perform multi-pass, all position fillet and butt welds using SMAW (Shielded Metal Arc Welding), GMAW (Gas Metal Arc Welding)< and FCAW (Flux Cored Arc Welding)
Knowledge of welding techniques (oxygen-acetylene, electric arc, and TIG), tools and equipment
Technical training preferred
Knowledge of and ability to use hand tools and instruments associated with the trade
Must be able to work effectively with others
Comprehend blueprints, sketches, and templates
Enter and move through manholes to reach and work in internally confined spaces

Responsibilities:

Weld together metal components of products, as specified by layout, blueprints, diagram, work order, welding producers, or oral instructions, using electric arc-welding equipment
Prepare all material surfaces to be welded, ensuring that there is no loose or think scale, slag, rust, moisture, grease, or other foreign matter
Weld completion in flat, horizontal, vertical, or overhead positions
Operate manual or semi-automatic welding equipment o fuse metal segments, using processes such as gas tungsten arc, gas metal arc, flux-cored arc, plasma arc, shielded metal arc, resistance welding, and submerged arc welding
Manually apply filler rod to supply weld metal
Clean or degrease weld joint or work piece, using wire brush, portable grinder, or chemical bath. May repair broken or cracked parts and fill holes
Set up and operate welding equipment and select proper electrodes according to metals to be joined or as instructed
Preform grinding and joint preparation for NDT processes
Burning, washing, edge prepping using hand and automated equipment
Flux cored inner shield and dual shield welding along with oxy-acetylene torching, air-arc, weld-wire gas, stick and pipe flange
Construct or repair metal products by joining parts either manual (using a variety of welding methods including electric arc, MIG and TIG welding or oxy-acetylene welding) or by machine
Read and understand the Chemist and Competent Persons reports and determine if job sites, particularly those involving combustible material, are safe for personnel and hot work
Preforms grinding and joint preparation for NDT processes
Mark or tag material with proper job number, piece marks, and other identifying marks as required
Will be required to wear personal protective equipment â hard hat, safety glasses, steel toe boots/shoes and, when necessary, respirator

Hours:

1st Shift â Starts at 6AM â may work 8,10 or 12 hour shifts
2nd Shift â Starts at 3PM â may work 8, 10 or 12 hour shifts

Pay:

Local - Up to $30/Hour depending on experience

]]> Thu, 02 Apr 2026 00:00:00 EDT 0 <![CDATA[Stage Builder]]> We have a wonderful opportunity for a Stage Builder position in Newport News, VA with one of our Clients in the Ship Repair Industry.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

Erect, modify, inspect, and dismantle all types of staging and scaffolding systems in accordance with shipyard safety regulations and engineering requirements
Ensure staging structures are secure, stable, and suitable for use by other trades and personnel
Perform routine maintenance and adjustments to existing staging as project needs evolve
Work effectively at elevated heights, over water, and in tight or confined spaces such as tanks, compartments, and hull sections
Follow all safety procedures, including fall protection, confined space protocols, and hazard recognition
Collaborate with supervisors and team members to complete assignments efficiently and on schedule
Maintain tools and equipment in safe working condition
Must be able to lift and carry over 40 pounds

HOURS:

1st Shift-7am-3:30pm
2nd Shift-3:30pm-12:00Am
3rd Shift- 10:00pm-6:00am
Must be open to all shifts

PAY:

$22-$27.31/Hour based on experience; Per Diem is offered for Non-local

]]> Tue, 17 Mar 2026 00:00:00 EDT 0 <![CDATA[Deckhand]]> We have an exciting opportunity for a local/Nonlocal Deck Hand position in Newport News, VA with one of our Clients in the Ship Repair Industry.

Qualifications

Preparing all necessary towing gear is in good order, properly stowed, and ready for use
Ensuring that tug and barge equipment is in good operating condition
Making sure barges are moored safely along piers and ships
Making sure all hatches are properly secured to prevent ingress of water
Knowing where all emergency equipment is located and ensuring first aid kit is fully stocked
Act as lookout during the navigation of a tug
Perform periodic checks of the engine room and including the bilges, fluid levels on main and auxiliary engines and gear boxes, and battery water levels
Keep all areas of the tug in clean, organized, and safe condition

Hours:

Must be open to all 3 shifts
1st shift-7am-3:30pm
2nd 3:30pm-12am
3rd shift 11pm-7am

Pay:

$22-$27.31 Hour
$135/day per diem for those who qualify

]]> Fri, 13 Mar 2026 00:00:00 EDT 0 <![CDATA[Machinist O/S]]> We have a wonderful opportunity for Outside Machinists in Newport News, VA with one of our Clients in the Ship Repair Industry.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

Installation of hull inserts.
Ability to comprehend complex drawings, blueprints, diagrams, and sketches.
Use of lapping and blue checking tools.
Working knowledge of shipbuilding terms and nomenclature.
Valve overhaul (steam and wog) AC & refrigeration repair
Installation of lift check valve.
Steam plant cleanliness knowledge
Installation of main engine, propulsion plant machinery and equipment.
System cleanliness grade knowledge.
Installation of aircraft elevator.
Testing main engine.
Hydrostatic testing
installation of anchor windlass.
Installation of mast and antenna.
Lube oil flushing.
Installation of arresting gear.
Installation of noise equipment
Installation of sea valves.
System Grooming Operate boring bar.
Installation of VALVE AND PUMP packing.
Valve overhaul. Operate cargo crane.
Operate portable milling/drill machine.
Generator and steam turbine work.

HOURS:

1st Shift-7am-3:30pm
2nd Shift-3:30pm-12:00Am
3rd Shift- 10:00pm-6:00am
Must be open to all shifts

PAY:

$22 - $27.31/Hour based on experience; Per Diem is offered for Non-local

#ISS

]]> Thu, 12 Mar 2026 00:00:00 EDT 0 <![CDATA[Grinding Machine Operator]]> We have an exciting new opportunity for a Grinding Machine Operator in a CLIMATE CONTOLLED SHOP in Newport News!

Qualifications:

Must have understanding of basic math skills (adding/subtracting, decimals and fraction equivalents)
Must demonstrate basic mechanical aptitude
Must be able to be on feet for extended periods of time and lift upwards of 50 lbs

Job Duties entail but are not limited to:

Ability to fill out paperwork in the correct manner (accurately).
Attention to details
Ability to record and follow written and verbal instructions.
Operate machinery in a safe manner
Maintain equipment and cleanliness of work area.

Schedule:

Monday-Friday 7am-3:30pm
Must be flexible to work OT

Pay:

$17-$19 per hour based on experience

]]> Fri, 06 Mar 2026 00:00:00 EST 0 <![CDATA[Document Preparation Technician]]> Summary of Position

The Document Preparation Technician, under general supervision, will prep and perform a quality check of hard copy records.

Essential Duties and Responsibilities

Process and prepare a high volume of hard copy records for scanning, ensuring all documents are correctly sorted and prepped for efficient conversion.
This can include classifying easily recognizable documents, orienting pages, repairing and removing objects such as staples and paper clips from documents.
Removes various format documents and folders from boxed content and prepares them by unfolding corners, taping down small pieces of paper onto larger sheets. Placing patches or bar code separators in between records for scanning.
Performs quality review of the prepared records prior to handing them off to scanning technician to ensure accuracy and completeness of the paper files.
Ability to consistently maintain production quotas while sustaining high levels of quality.
Follows the security and privacy policies, standards and guidelines to protect the informational assets of both the company and their customers.
Other duties as specified by your Lead/Supervisor.

Qualifications

High school diploma or equivalent.
Highly detailed oriented with great attention to quality output and adherence to a production quota.
Proven ability to work independently with minimal supervision and maintain a focused pace to meet production rates and quality targets.
Proficiency in reading, writing, and communicating in English.
Flexibility to work overtime (OT) or weekends as needed.
Ability to lift 30 â 50 lbs.
Ability to maintain confidential information.
Must have US Citizenship or be a Lawful Permanent Resident
Must have registered with the Selective Service (Males only)
Must be Federal Tax Compliant
Must be able to obtain and maintain a government clearance

Schedule:

Monday-Friday 7:30am-3:30pm

Pay:

$23.34/hour
- $18.25/hour + $5.09 Health & Wellness

#ISS

]]> Thu, 19 Feb 2026 00:00:00 EST 0 <![CDATA[1 CNC Programmer]]> We have a new exciting opportunity for a CNC Programmer in Hampton

Qualifications:

5 to 7+ years of CNC programming experience in a regulated manufacturing environment
Strong knowledge of CNC machining, tooling, feeds, speeds, and multi-axis machining
Proficiency with CAM software (e.g., Mastercam, Fusion 360, GibbsCAM) and G-code
Ability to read and interpret aerospace/defense drawings and GD&T
Experience working under AS9100 or ISO 9001 quality systems
Job Duties Include but are not limited to:
Develop, validate, and maintain CNC programs for mills, lathes, and multi-axis machines in compliance with AS9100 quality standards
Interpret controlled engineering drawings, CAD models, specifications, and GD&T requirements
Ensure CNC programs, setup sheets, and tooling documentation meet configuration control and revision requirements
Support first article inspections (FAI) per AS9102 and assist with validation of machining processes
Select approved tooling, fixtures, and machining strategies to meet material, tolerance, and surface finish requirements
Collaborate with Quality, Engineering, and Production to resolve nonconformances, corrective actions, and root cause investigations
Optimize machining processes while maintaining compliance with customer and contractual requirements
Support internal and external audits, including customer, government, and third-party audits
Ensure programs follow cybersecurity, data control, and export compliance requirements (ITAR/EAR as applicable)
Maintain traceability of programs, revisions, and process changes

Schedule:

Monday-Friday 7am-3:30pm

Pay:

$35.00 per hour to $45.00 per hour

#ISS

]]> Fri, 23 Jan 2026 00:00:00 EST 0 <![CDATA[Machinist]]> We have an exciting new opportunity for a Machinist in Hampton!

Qualifications:

Experience: Minimum 5 yearsâ experience as a CNC Machinist or in a similar role in a manufacturing environment
Technical Skills: Strong knowledge of machine tools and their operation, including lathes, milling machines, grinders, and drills
Blueprint Reading: Ability to read and interpret blueprints, technical drawings, and specifications
Precision Measurement: Experience with precision measurement tools, such as micrometers, calipers, height gauges, and dial indicators
Problem-Solving: Ability to troubleshoot and resolve issues with machine tools, parts, or production processes
Attention to Detail: A high level of precision and accuracy when machining parts to ensure quality standards are met
Mechanical Aptitude: Strong understanding of machining processes and maintenance

Job Duties Include but are not limited to:

Set Up and Operate Machines: Operate and set up a variety of machine tools (e.g., lathes, mills, grinders, drills) to produce high-precision metal or plastic parts.
Read and Interpret Blueprints: Interpret technical drawings, blueprints, and specifications to understand the dimensions and tolerances of the parts to be produced.
Select and Install Tools: Choose the correct cutting tools, speeds, and feeds based on the materials being worked with and the specifications provided.
Measure and Inspect: Use precision measuring instruments (calipers, micrometers, gauges, etc.) to ensure parts meet the required dimensions and tolerances.
Machine Maintenance: Perform routine maintenance and cleaning of machines to ensure proper function. Report any mechanical issues or breakdowns to supervisors.
Quality Control: Inspect finished parts to ensure they meet high-quality standards, performing final checks before parts are sent to assembly or finished product stages.
Modify and Adjust Machines: Adjust machine settings to optimize performance, including correcting or making changes to tolerances during production runs.
Troubleshooting: Identify and resolve machining issues such as incorrect dimensions, tool wear, or machine malfunctions.
Safety and Cleanliness: Adhere to all safety protocols and ensure the work area is clean and organized.
Collaborate with Team Members: Work closely with engineers, supervisors, and other machinists to meet production goals and deadlines.

Schedule:

Monday-Friday 6:00am-2:30 or 7:00am-3:30

Pay:

$30.00 per hour to $38.00 per hour based on experience

#ISS

]]> Wed, 07 Jan 2026 00:00:00 EST 0 <![CDATA[Electrician - Commercial]]> Our client in Virginia Beach, VA is looking for Commercial Electricians. You will be joining a team at a quickly growing company that has tremendous job opportunity in an Industrial setting.

Requirements/Qualifications:

4+ years commercial electrical experience preferred
Work 40 hour work week, overtime as required
Some experience diagnosing mechanical problems involving air-conditioning or refrigeration equipment, manufacturing equipment and tools.
Bend Conduits using hand benders, mechanical benders or hydraulic benders Knowledge of the use of power tools, saws, threaders, wire tuggers, knock punches and any tools associated with the electrical industry.
Operate two handed tools/equipment, cable cutters, hammer drills, compression tools, jack hammers and any other tools associated with the electrical industry.

Duties/Responsibilities:

Install new or modified electrical installations consistent with local and national codes.
Plan electrical installations to minimize waste of materials, provide access for future maintenance, and avoid unsightly, hazardous, and unreliable wiring
Follow diagrams, blueprints and interrupt specifications
Application and knowledge of journeyman electrician level skills in the installation and repair of electrical systems and associated activities which may include the application of some mechanical knowledge to diagnose repair needs for air-conditioning and refrigeration equipment, or other equipment as necessary.
Perform any and all work tasks and comply with any work schedules, attendance or duty requirements which may be established by City or Department Rules.
Perform related work as assigned or specified in project drawings, customer specification or project requirement.
Manage the cleanliness and organization of the Electrical Shop and main facility
Some Travel to job sites when needed
Maintain all work sites clean and in order
Demonstrate safe work habits and proper care of equipment and tools
Complete all required paperwork
Work from all types of step ladders, frame ladders and all size extension ladders.
Adhere to all safe work procedures
Attend educational and training classes when required

Hours:

Day Shift: Monday â Friday 8AM until 430PM
Night Shift: Monday â Thursday 5PM â 330AM

Pay:

Day Shift: $20-28/Hour
Night Shift: $23-32.20/Hour

#ISS

]]> Wed, 31 Dec 2025 00:00:00 EST 0 <![CDATA[Radiography Testing Inspector 2]]> We have an exciting opportunity Radiography Testing Inspector 2 in Newport News, VA with one of our Clients in Shipbuilding Industry.

Qualifications:

Must have TC1A Qualifications. Having 250-1500 qualifications would be a plus

DUTIES AND RESPONSIBILITIES:

Must be able to pass hair follicle drug test
Must have TC1A Qualifications. Having 250-1500 qualifications would be a plus.
Blueprint reading
All inspectors shall have documented qualification/certification to the Level II requirements of ASNT SNT-TC-1A, 2016 Edition
RT inspectors must have passed and have documentation of certification of IRRSP from an approved entity
Inspectors shall have passed written general theory, procedure specific and practical examinations for RT inspection piping, casting and or structure welds
Specific examinations cover the equipment, operating procedures and test techniques that candidates may encounter in their specific assignment.
Specific examination also covers the specifications, codes and acceptance criteria used in the applicable NDT procedures. Practical examination covers inspection performance of X-ray and Gamma radiography.

Hours:

1st Shift â Starts at 6AM â may work 8,10 or 12 hour shifts
2nd Shift â Starts at 3PM â may work 8, 10 or 12 hour shifts
3rd Shift â Starts at 10pm- may work 8, 10 or 12 hours shifts

Pay:

Non-Local: Up to $36-$46 depending on experience + $135 Per Diem

#ISS

]]> Thu, 23 Oct 2025 00:00:00 EDT 0 <![CDATA[Pipefitter]]> We have a wonderful opportunity for a Pipefitter in Newport News, VA with one of our Clients in the Ship Repair Industry.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

Must be able to pass hair follicle drug test
Read and interpret ship piping drawings
Experienced fitting carbon steel, CRES, and copper nickel piping
Ability to end prep piping by hand and/or with Wach or Portsmouth Machine
Knowledge in installing pipe hangers
Ability to read a ruler using inches and tenths
Prep and fit-up backing rings
Clean cut/break pipe with a grinder
Ability to hand prep V bevels
Experience in fabrication of various details and assemblies from drawings
Bend pipe from template and in the use of a hand bender
Must be able to fit brazed joints with/without insert ring
Prep and fit-up backing rings

HOURS:

1st Shift-7am-3:30pm
2nd Shift-3:30pm-12:00Am
3rd Shift- 10:00pm-6:00am
Must be open to all shifts

PAY:

$29.50/Hour based on experience; Per Diem is offered for Non-local

#ISS

]]> Fri, 03 Oct 2025 00:00:00 EDT 0 <![CDATA[Large Machinist I/S Marine-Offsite]]> We have a wonderful opportunity for Inside Machinist Large equipment operator in Newport News, VA with one of our Clients in the Ship Repair Industry.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

Experience with Horizontal Boring Mills, HBMâs will have travel that are in the range of X - 500”, Y - 250”, Z - 50” and W - 65” they will also have turn tables that are about 10â square with a load capacity of 100 tons
Vertical Turning Centers, VTCâs will have tables that are roughly 80” in diameter with a 20 ton table capacity. X total travel will be about 160” and Z will have 80” of travel.
Gantry Mill experience
Be able to look at blueprint drawings and set the best average
Manuel Machine experience
Experience with 10ft lathe machine

HOURS:

1st Shift-7am-3:30pm
2nd Shift-3:30pm-12:00Am
3rd Shift- 10:00pm-6:00am

Must be open to all shifts

PAY:

$37.50-$45/Hr depending on location-Per Diem is offered for Non-local

#ISS

]]> Thu, 25 Sep 2025 00:00:00 EDT 0 <![CDATA[Machinist I/S Marine]]> We have a wonderful opportunity for Inside Machinist Large equipment operator in Newport News, VA with one of our Clients in the Ship Repair Industry.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

Experience with Horizontal Boring Mills, HBMâs will have travel that are in the range of X - 500”, Y - 250”, Z - 50” and W - 65” they will also have turn tables that are about 10â square with a load capacity of 100 tons
Vertical Turning Centers, VTCâs will have tables that are roughly 80” in diameter with a 20 ton table capacity. X total travel will be about 160” and Z will have 80” of travel.
Gantry Mill experience
Be able to look at blueprint drawings and set the best average
Manuel Machine experience
Experience with 10ft lathe machine

HOURS:

1st Shift-7am-3:30pm
2nd Shift-3:30pm-12:00Am
3rd Shift- 10:00pm-6:00am

Must be open to all shifts

PAY:

$37.50-$45/Hr depending on location-Per Diem is offered for Non-local

#ISS

]]> Thu, 25 Sep 2025 00:00:00 EDT 0 <![CDATA[Pipe Welder]]> We have an exciting opportunity for a local/Nonlocal Pipe Welder position in Newport News, VA with one of our Clients in the Ship Repair Industry.

Qualifications

Multi-pass. All position fillet and butt welds using the SMAW (Shielded metal arc) process
Ability to fuse inserts and weld carbon steel, stainless steel and copper nickel pipe using the SMAW and GTAW (Gas Tungsten Arc Welding) processes
Mirror welding using SMAW and GTAW
Use fillet gauges, butt gauges, and a six-inch scale
Heating oxygen/propane heating
Ability to fuse inserts and weld carbon steel, stainless steel and copper nickel pipe
Must be able to pass hair follicle drug test

Hours:

Must be open to all 3 shifts

Pay:

$50 Hr
$135 Per diem if you qualify

#ISS

]]> Wed, 17 Sep 2025 00:00:00 EDT 0 <![CDATA[Structural Welder]]> Job Duties/Qualifications:

3+ yrs. experience welding in Shipyard/Industrial environment
Must be able to test and qualify with SMAW, GMAW and FCAW welding processes in the 2G, 3G and 4G positions
Must have own basic welding tools
Work consists of welding foundations, bulkheads, shell plate, etc. - new Construction
Ability to read welding symbols, perform basic math and use fillet & butt weld gauges
Able to set-up, tear down and operate Oxygen/Propane torch equipment
Must be U.S. citizen with CLEAN BACKGROUND and able to pass a hair follicle Drug Test
Long Term Assignments Available (Up to 2 years)
ACA Health Insurance Benefits Available
Per Diem Available for Those Who Qualify

Requirements:

• Must be at least 18 years of age

• Pass background check and urinalysis

• Strong Work Ethic

• Must be able to lift 50lbs

• Willing to work on/around ships

We Offer:

• Weekly Pay

• Overtime available

• Long term projects

Benefits:

• Vacation & Holiday pay

• Health Insurance

• Attendance Bonuses

#ISS

]]> Thu, 28 Aug 2025 00:00:00 EDT 0 <![CDATA[Shipfitter - Advanced]]> Job Description/Requirements:

Must have 4 years commercial/naval experience as a first class Shipfitter.
Multi-Pass Tack Welding.
Burning-Oxygen/Propane Burning Torch, Heating-Oxygen/Propane Heating Torch.
Comprehend complex structural assembly drawings, blueprints, and sketches to include weld symbols, material types, datum and reference lines.
Understand fractional dimensions as with the use of a ruler, layoff piece parts for fabrication and assembly, assemble structural piece parts in accordance with specifications in a quality manner, use Molded Lines and Ship Reference Lines to execute required work.
Use vibratory tools:
Grinders
needle guns
Air Carbon Arc Gouging.
Ability to Erect, Set and Makeup Complex-shaped Shell Plates, Decks, Bulkheads, Longitudinals, trunks
Install and Replace Hull Inserts and Penetrations
Must be able to climb up and down vertical ladders, bend, squat, kneel, work in confined spaces & around moving equipment.

Requirements:

Must be at least 18 years of age
Pass background check and urinalysis
Strong Work Ethic
Must be able to lift 50lbs
Willing to work on/around ships

We Offer:

Weekly Pay
Overtime available
Long term projects

Benefits:

Vacation & Holiday pay
Health Insurance
Attendance Bonuses

#ISS

]]> Wed, 13 Aug 2025 00:00:00 EDT 0 <![CDATA[Sheet Metal Mechanic]]> Experience:

Three years of experience as a first class Sheet Metal Worker in the installation of foundations, ventilation, bulkheads, shipboard furniture and sheet metal fabrication shop work. Marine experience preferred
Aircraft/Industrial/Commercial sheet metal experience is acceptable

Required Skills:

Comprehend complex ventilation assembly drawings, blueprints, and sketches to include weld symbols, material types, datum and reference lines.
Ability to comprehend fractional and decimal dimensions as with the use of a ruler.
Layoff piece parts for fabrication and assembly
Ability to assemble piece parts in accordance with specifications in a quality manner
Experience working in a physically demanding environment
Familiarity with OSHA regulations relative to the shipbuilding industry
Experience using small hand tools (electric drills, grinders, rivet guns), and shop equipment (drill press, press break, Shears etc.).

Requirements:

• Must be at least 18 years of age

• Pass background check and urinalysis

• Strong Work Ethic

• Must be able to lift 50lbs

• Willing to work on/around ships

We Offer:

• Weekly Pay

• Overtime available

• Long term projects

Benefits:

• Vacation & Holiday pay

• Health Insurance

• Attendance Bonuses

Pay starting at $27.31/hour

Per diem available to those eligible

#ISS

]]> Wed, 13 Aug 2025 00:00:00 EDT 0