<![CDATA[Integrity Staffing Services: jobboards]]>

<![CDATA[Integrity Staffing Services: jobboards]]> https://JOBS.INTEGRITYSTAFFING.NET/ en-us <![CDATA[TIG Welder]]> Position Overview:

We are currently seeking experienced Aluminum TIG Welders for shop work in Chesapeake, VA. This is a contract-to-hire opportunity with steady hours, overtime potential, and long-term growth opportunities. Candidates must have experience TIG welding thin aluminum sheet metal.

Job Duties:

Perform TIG welding on thin aluminum sheet metal components
Read and interpret basic fabrication drawings and specifications
Operate welding and fabrication equipment safely and efficiently
Produce high-quality welds with minimal distortion or burn-through
Use basic hand tools and measuring devices
Maintain a clean and safe work environment
Assist with fabrication and fitting as needed

Requirements:

Must have experience TIG welding thin aluminum
Experience with sheet metal welding preferred
Must be able to pass an aluminum TIG weld test
Must have basic hand tools and welding helmet
Ability to lift up to 50 pounds
Must be dependable and able to work overtime as needed

Pay Rate:

$20.00 - $30.00/hour
(Based on experience and weld test results)

Schedule:

Monday-Friday
- 6:00 AM â 2:30 PM OR 6:00 AM â 4:30 PM
Saturdays: 6:00 AM â 12:00 PM

]]> Tue, 12 May 2026 00:00:00 EDT 0 <![CDATA[Pipe Welder]]> Position Summary:

The Pipe Welder performs welding and thermal cutting operations to assemble, fabricate, and repair metal structures and piping systems in accordance with blueprints, drawings, and shipyard standards. This role requires precision, attention to detail, and adherence to all safety procedures for hot work and confined space operations.

Roles & Responsibilities:

Weld and fuse metal parts using TIG welding equipment per specifications.
Connect and regulate hoses, torches, and gas flow for oxygen/fuel or shielding gas mixtures.
Ignite torch, regulate flame, and preheat workpieces prior to welding or bending.
Examine and measure workpieces using straightedges, templates, or other gauges to ensure conformance.
Prepare and inspect work areas, ensuring hot work permits and Lock-Out/Tag-Out procedures are in place.
Clean, prepare, and inspect joints before welding; verify weld quality and report or correct defects.
Dismantle assemblies or cut scrap using flame-cutting or plasma-arc equipment.
Position, secure, and align materials using hoists, cranes, or hand tools.
Guide torch or electrode to straighten, bend, melt, or build up metal.
Climb ladders, work on scaffolds, and signal crane operators as needed.
Document existing conditions and ensure compliance with all safety standards.

Qualifications:

Experience: 3â5 years minimum TIG welding experience (shipyard experience required or 10+ years of industrial pipe welding experience required)
Must pass pre-employment physical and drug test
Must have reliable transportation
Strong understanding of welding procedures, drawings, and safety protocols

Pay:

$33-38/hour + Per Diem if qualified

Schedule:

Must be available to work any of the below schedules
- Monday-Thursday: 5am-3pm
- Monday-Thursday: 4pm-2am
- Sunday, Friday, Saturday: 5am-5pm, Thursday 5am-9am
- Sunday, Friday, Saturday: 5pm-5am, Thursday 5am-9am

#I08

]]> Tue, 12 May 2026 00:00:00 EDT 0 <![CDATA[Welder]]> Integrity Staffing has exciting new opportunities for Shipyard Welders in the Houston, TX area!

Role & Responsibilities:

Must be familiar with welding on a Miller Machine
Weld stainless steel barge & boat repair areas, internal compartments & cargo tanks, external surface areas, and specialty components & areas with the required number of passes to achieve full penetration welds.
Grind barge & boat repair areas, internal compartments & cargo tanks, and external surface areas in preparation for welding
Operate welding & grinding equipment (ex. Miller Machine), blowers, hoses, etc., to accomplish weld & repair duties
Walking, stepping, climbing, or otherwise moving from one location on the job site to another, which may be of varying heights and access parameters.
Lifting objects of a minimum of 10lbs, with a maximum single-person lift limit of 50lbs, with frequent lifting and carrying.

Qualifications & Education Requirements:

Must pass a 3G/4G welding test to obtain internal skill classification.
Must have experience with SMAW (Stick) and FCAW (Flux Core)
Able to work without contact lenses.
Must have welding experience using 100% C02
Must have stainless steel welding experience in the Ship Repair industry

Schedule:

Monday-Sunday 6am-3:30pm and 3:30pm-12am (midnight)
Monday-Sunday 5am-2:30pm and 3:00pm-1am

Pay:

$18-23/hour

#I08

]]> Tue, 12 May 2026 00:00:00 EDT 0 <![CDATA[Certified Painter]]> Position Summary:

The Certified Painter applies protective coatings to ships, tanks, and other marine structures using brushes, rollers, and spray equipment. This position requires knowledge of surface preparation, coating applications, and marine preservation processes in accordance with SSPC standards.

Qualifications:

Certifications: Must hold at least one of the following SSPC certifications: C-7, C-12, or C-14
Education: High school diploma or equivalent required
Experience: Minimum 3 years marine painting experience
Ability to read and comprehend instructions, drawings, and technical correspondence
Strong understanding of ship terminology and compartment nomenclature
Proficient with marine coatings, surface preparation, and blasting equipment
Must have knowledge of coating preservation processes per SSPC standards
Must be able to work in tight spaces and at heights
Must pass pre-employment physical and drug test
Must have reliable transportation

Key Responsibilities:

Prepare and clean surfaces by scraping, sanding, needle gunning, and blasting to remove old paint and rust.
Mix and apply coatings according to Material Data Sheets (MDS).
Apply primers and finish coats to required MIL specifications and standards.
Operate and troubleshoot abrasive blast and spray paint equipment (airless and conventional).
Mask, tape, and protect surfaces from overspray or damage.
Inspect preserved areas and perform touch-up work as needed.
Estimate material quantities and labor requirements for assigned tasks.
Safely use hand and power tools associated with the trade.
Follow all safety, environmental, and quality control procedures.

Pay:

$28/hour plus Per Diem if qualified

Schedule:

Must be available to work any of the below schedules
- Monday-Thursday 5am-3pm
- Monday-Thursday 4pm-2am
- Sunday, Friday, Saturday 5am-5pm, Thursday 5am-9am
- Sunday, Friday, Saturday 5pm-5am, Thursday 5am-9am

#I08

]]> Tue, 12 May 2026 00:00:00 EDT 0 <![CDATA[General Laborer]]> We have a wonderful opportunity for General Laborer in Ranson, WV with the local manufacturer.

QUALIFICATIONS:

Previous manufacturing experience preferred

ESSENTIAL DUTIES AND RESPONSIBILITIES:

Helping to put the correct labels or placard out-going trucks
Will be strapping up trucks securing loads on trailers
Repairing, replacing, or tightening metal/plastic bands that hold bundles of lumber together.

HOURS:

2nd shift is from 3pm to 12:00am but may go past 12am as needed.

PAY:

Pay starts at $15.00

#ISS

]]> Mon, 11 May 2026 00:00:00 EDT 0 <![CDATA[Shipfitter]]> We have an immediate opening for a Sr Shipfitter in New Orleans, Louisiana.

Responsibilities:

Typical job duties involve structural fitting and tack welding of various assembly and sub-assembly parts on the vehicle.
Works from Engineering drawings, sketches and written and verbal instructions.
Maintains records, forms and logs as required.
Typical tools and equipment used in the performance of duties are MIG and TIG welders, manual hand tools , mechanical, pneumatic, cordless and electric tools including porta power, come alongs, clamps, hammers and mauls, gougers, grinders, saws, band saws, drills, tapes and scales.
Must be capable of handling chemicals and solvents including alcohol, cleaning solvents, cutting oil, tool oil, etc.
Housekeeping of shop and work area (keeping work area neat and clean) daily.
Must visually inspect work to drawings and sketches for completeness and dimensional correctness.
May direct the activities or tasks of helpers, as assigned.
Perform other job related duties as assigned.

Education:

High school graduate or General Education Diploma.

Position Requirements:

Three (3) plus years of related fabricating or shipfitting experience.
Formal craft training to demonstrate the ability to read blueprints, engineering drawings and sketches, layout and fabricate parts and assemblies correctly.
Demonstrated skills based on the results of the shipfitting/welding test.
Must be safety conscious (wear proper PPE at all times).
Must be able to follow written and verbal instructions.
Able to read and understand metric and standard dimensions (a plus).
Must regularly lift, move or carry 40 pounds of material.
Must be willing to work rotating shifts.
Ability to become certified as a forklift and overhead crane operator.
Willingness and flexibility to work extended hours as needed to accomplish the task or work with little or no prior notification.

Pay: $28/hour

Schedule: Monday-Thursday 7am-4pm

#I08

]]> Mon, 11 May 2026 00:00:00 EDT 0 <![CDATA[Aluminum Welder]]> Integrity has an exciting opportunity to for an Aluminum Welder in New Orleans, LA. This is a long-term contract that offers Per Diem!

About This Role

Requires 1-3 years of aluminum welding experience in all positions, specifically using GTAW (Tig Welding) process.
Must be able to work from standing, sitting, lying and kneeling positions. Some work must be accomplished with the use of mirror welding.
Climbing on and over bulkheads, up and down ladders, etc.
Tack welding (kneeling, standing, sitting, lying, overhead burning of steel, dragging torch line)
Lifting of material and tools (jacks, porta-powers, come-a longs, etc). Also loading and unloading of parts.
Use of power tools (gougers, skill saws, cut saws, grinders). All require two hands on tools to operate in safe manner
Walking on tops of frames and tees (uneven walking surfaces)

Qualifications

Prefers aluminum welding certificate from recent experience.

Level will be determined based on relevant experience, scope of role, skills, etc

Education Requirements:

Must have high school diploma, GED or equivalent certificate, or bronze level (or higher) for ACT WorkKeys Certification.

Schedule:

Monday-Thursday: 5:30am-4pm

#I08

]]> Mon, 11 May 2026 00:00:00 EDT 0 <![CDATA[Industrial Maintenance Technician]]> We are seeking an Industrial Maintenance Technician to join our team on a contract-to-hire basis in Virginia Beach. In this role, you will be responsible for troubleshooting, repairing, and maintaining industrial manufacturing equipment and facility systems within the USM manufacturing environment.

Key Responsibilities:

Troubleshoot and repair CNC machines, lathes, mills, conveyors, compressors, and facility systems
Perform mechanical and electrical troubleshooting safely using Lockout/Tagout procedures
Conduct preventative maintenance on machinery and building systems
Read and interpret schematics, manuals, and flow charts
Troubleshoot motors, lighting, industrial power systems, and controls
Support facility maintenance including plumbing, lighting, and HVAC systems
Operate forklifts and lifts safely as needed
Ensure compliance with safety and regulatory standards regarding manufacturing and assembly equipment

Required Qualifications:

Hands-on industrial maintenance experience required
Strong mechanical and electrical troubleshooting skills
CNC maintenance experience preferred
Comfortable working independently and within a team environment
Familiarity with industrial safety standards and Lockout/Tagout procedures
Strong mechanical aptitude and reliability
Experience using Microsoft Office preferred
Ability to use basic metrology equipment such as calipers and micrometers
Understanding of mechanical alignment fundamentals
Comfortable working at heights using scissor lifts or boom lifts as needed

Schedule:

Monday â Friday, 7:00 PM â 3:30 AM
Training will take place on First Shift (7:00 AM â 3:30 PM) for approximately 6 months

]]> Mon, 11 May 2026 00:00:00 EDT 0 <![CDATA[Machine Operator]]> Duties & Responsibilities:

Operating a sort machine in a fast-paced production-based environment
Responsible for filling out safety checklists/production logs/ quality logs on time and with accuracy
Work in accordance with a quality system that is compliant with the clients standard and in compliance with SQF standard
Have the ability to lift 55 lbs. consistently throughout the day
Establish an effective line of communication with peers and management
Perform a clean as you go method on production floor and good housekeeping practices
Sort a minimum of 10,000 tier sheets per 8-hour shift

Skills and Knowledge preferred:

• Knowledge of transport packaging and production-based warehouse environment

• Food safety knowledge

• Knowledge of 5s lean manufacturing

• Ability to operate sort machine at a high level thought out the day stay in sync with customer production levels

• Able to perform in a fast-paced work environment while multi-tasking

• Able to perform effective verbal communication between associates and customers

Job Requirements:

• At least 2 years previous warehouse experience in a fast-paced warehousing environment

• At least 2 years previous production-based work

• Ability to provide an effective line of communication

Hours:

1st Shift
- M-F 6AM â 230PM
2nd Shift
- M-F 2PM â 10PM

Pay:

$18.00 - $18.50/hour

]]> Mon, 11 May 2026 00:00:00 EDT 0 <![CDATA[Parts Cleaner]]> We are seeking a Parts Cleaner Associate to join our team on a contract-to-hire basis. In this role, you will be responsible for general labor duties such as cleaning and removing burrs and chips from machined parts, transferring parts at production lines, and supporting daily production operations.

Key Responsibilities:

Review route and process sheets for instructions
Inspect parts for visual defects
Remove excess burrs, chips, and casing sand from machined parts
Load and unload parts in parts washers
Apply rust inhibitor to all cast iron and steel parts
Conduct final part counts, review paperwork for errors, and ensure tags are properly completed
Package parts appropriately to prevent damage during transport
Perform cleaning and routine maintenance while maintaining proper water levels daily
Assist with process improvements to eliminate waste and reduce costs
Transfer parts throughout production lines as needed

Qualifications:

High School Diploma or GED required
Minimum of 1 year of warehouse or material handling experience required
Proficient with Microsoft Office Suite, including Excel and Word
Ability to lift and carry up to 40 lbs.
Strong attention to detail and ability to work in a fast-paced manufacturing environment
Reliable attendance and ability to work independently or as part of a team

Schedule:

Monday â Friday , 7:00 PM â 3:30 AM
Will train on First Shift (7:00 AM â 3:30 PM) for 4â6 weeks

Pay Range:

$17â$19/hr.

]]> Mon, 11 May 2026 00:00:00 EDT 0 <![CDATA[Assembly Mechanic]]> We have an exciting opportunity for Assembly Mechanics in Virginia Beach, VA with one of our manufacturing clients. If you're someone who thrives in a fast-paced environment, values organization, and takes pride in getting the job done right, we want to hear from you.

JOB DETAILS:

Assemble the components such as: valves, piping, instrumentation, vessels and pumps into a single Vacuum Pump System
Operate industrial sit-down forklifts while maintaining daily inspection sheets
Weld carbon steel piping, weld and fabricate structural modifications
Prepare time, production and inventory records as required
Maintain qualification and management authorization to work within the limited approach boundary of electrically energized circuits
Verify safe electrical wiring of pumps and systems prior to energizing circuits for test
Install appropriate boundaries and signage for affected employees prior to energizing electrical circuits
Electrically energize circuits for pumps and systems to record amperages and voltages as necessary

EXPERIENCE:

High School Graduate or GED: Required
Associateâs degree: Preferred
2 plus years of experience in heavy industrial assembly or equivalent trade school:
1 plus years of experience in hands-on assembly or service of vacuum systems or
related equipment and at least 1 year of related warehousing experience
Ability to read and understand complicated mechanical drawings/specifications,
measurement instrumentation and gauges
Proficiency in Microsoft Office (Word & Excel)
Maintain a Driver's License that meets Busch insurance standards

HOURS:

M-F 7:00am-3:30pm

PAY:

$20-$24/hour

]]> Mon, 11 May 2026 00:00:00 EDT 0 <![CDATA[Janitor]]> We have a wonderful opportunity for a Janitor in Summit Point, WV with a motor sports park.

QUALIFICATIONS:

Must have 0-1 years of cleaning experience
A valid Driverâs License
High School Diploma or GED

ESSENTIAL DUTIES AND RESPONSIBILITIES:

Clean and maintain buildings, facilities, classrooms
Use cleaning tools and other products
Remove and dispose of trash

HOURS:

Monday through Friday 5am to 1:30pm
- Or
Friday through Monday starting at 6am and up to a 12 hour shift. Up to 40 hours per week.
- Or
Part Time Saturdays & Sundays from 6am to 6pm

PAY:

Pay starts at $16.50

#ISS

]]> Fri, 08 May 2026 00:00:00 EDT 0 <![CDATA[Forklift Operator]]> We have a wonderful opportunity for Forklift Operator in Winchester, VA with the local manufacturer.

QUALIFICATIONS:

Must have 1 year of experience operating a forklift
Must be eligible to work weekends, holidays, and overtime
Valid DL or CDL preferred
Must be able to sit, stand, crouch, bend, kneel, walk, and reach for 8 plus hours
Must be able to lift at least 50 lbs

ESSENTIAL DUTIES AND RESPONSIBILITIES:

Will use forklift to load/unload productions onto trucks/trailers according to shipping schedule and operate other equipment as needed.
Support production and shipping processes by using forklift and pallet jack to transfer products, pallets, boxes and other materials.
Pull product from Alvey and Tote stations and put in warehouse or any other area as determined by the supervisor
Will use scanner to input info into systems
Monitor equipment for wear/damage, and perform routine maintenance.
Will change labels on Markem printer and input all info using scanners
Supply WIP product as needed and check conditions of totes, check production schedules and ensure all supplies are ready for the next shift and replenish as needed.
Collect and scrap cardboard as needed in the compactor

HOURS:

12 hour shift on a 2-2-3 schedule (6pm-6:30am)

PAY:

Pay starts at $20.20

#ISS

]]> Fri, 08 May 2026 00:00:00 EDT 0 <![CDATA[Gen Laborer]]> We have a wonderful opportunity for a General Laborer position in Winchester, VA with a local manufacturer.

QUALIFICATIONS:

To work effectively with others
Able to sit/stand/bend for long periods of time
Must be able to lift 60 pounds continuously
Knowledge of basic manufacturing operating procedures

ESSENTIAL DUTIES AND RESPONSIBILITIES

Watch conveyors to make sure the cinder block count is correct and palatize as needed.
Obtain correct materials for operation.
Sweep/shovel cement and dust as product is being made.
Work in warehouse environment under various temperatures.

HOURS:

1st shift is 7am to 3:30pm
2nd shift is 3pm to 11:30pm

PAY:

Pay is $16 or $17 depending on shift.

]]> Fri, 08 May 2026 00:00:00 EDT 0 <![CDATA[Strategic Sourcing Manager]]> We have an exciting opportunity for a Strategic Sourcing Manager position in Chesapeake Virginia!

Qualifications:

Must have a Bachelorâs degree in a related field with 7+ years of relevant experience, or high school diploma with 10+ years of direct strategic sourcing experience
Minimum 5 years of experience in the marine and/or defense industry with vendor sourcing and management responsibilities
Possess strong knowledge of U.S. government and defense shipbuilding supply chains
Experience managing vendor and parts data within ERP systems (e.g., Deltek Costpoint)
Must be proficient in Microsoft Office Suite
Ability to lead teams, solve complex problems, and manage multiple priorities effectively
Strong communication, critical thinking, and organizational skills

Job Duties entail but are not limited to:

Develop and execute strategic sourcing and purchasing activities to meet company performance goals
Identify, vet, qualify, and manage vendor relationships, including long-term agreements, subcontracts, and purchase orders
Supervise and support a team of buyers, ensuring performance, accountability, and professional development
Coordinate with Business Development, Program Management, Product Development, and Supply Chain teams to support sourcing strategies and mitigate vendor risks
Collaborate with corporate supply chain teams on vendor selection, evaluation, and process development
Review requisitions and purchase orders for accuracy in pricing and lead times prior to issuance
Expedite materials and services to ensure timely delivery and operational support
Maintain vendor performance metrics, records, and reporting (e.g., on-time delivery, open orders, small business reporting)
Manage parts master data, including creation and maintenance within ERP systems
Support vendor audits, compliance requirements, and resolution of non-conformities in coordination with QEHS
Ensure adherence to export compliance policies and supply chain procedures

Schedule:

8am-5pm Monday-Friday

Pay:

$97,000 to $140,000/year based on experience

Company Benefits Include:

Medical and Dental Insurance
Vision
HSA and FSA
Life/AD&D/Disability/Critical Illness/Accident/Hospital Indemnity
Paid Time Off
Employee Assistance Program (EAP)
Medicare Education
401(k) Retirement Plan

#ISS

]]> Fri, 08 May 2026 00:00:00 EDT 0 <![CDATA[Marine Carpenter]]> Position Summary:

Marine Carpenter is an entry-level skilled trades position responsible for assisting in the construction, repair, and installation of basic access and support structures aboard vessels and in the shipyard. This role requires fundamental carpentry skills, the ability to safely use hand and power tools, and the ability to accurately measure, cut, and assemble materials.

Key Responsibilities:

Assist in building and installing simple support and access structures (e.g., temporary enclosures, decking, support, staging access, basic framing such as a “doghouse” structure).
Measure, cut, and assemble wood and other materials using hand tools and power tools safely.
Maintain a clean and safe work environment in accordance with shipyard safety standards

Qualifications:

6 months of carpentry, construction, or related experience
Ability to use a level and ensure plumb/straight construction.
Basic understanding of carpentry principles (cutting, fastening, framing).
Read and follow basic drawings, sketches, and work instructions.
Use measuring tools (tape measure, square, level) to ensure accuracy and proper alignment.
Work alongside higher-level carpenters and supervisors to complete assigned tasks.
Handle material movement, staging, and preparation as needed.
Physically able to lift 40-50lbs, climb, bend, and work in confined or highly elevated spaces. Comfortable working in varying weather conditions, exposure to noise, and industrial hazards.
Safety-conscious mindset

Pay:

$21.00-24.00/hour

Schedule:

Monday-Friday 6am-2:30pm

#ISS

]]> Fri, 08 May 2026 00:00:00 EDT 0 <![CDATA[Material Handler]]> We have an exciting opportunity for a Material Handler position in Norfolk Virginia in a climate-controlled environment!

Qualifications:

Must have 1â3 years of production, warehouse, assembly, or manufacturing experience preferred
Must be able to stand for up to 8 hours per shift
Must have clean background
Strong attention to detail and accuracy
Ability to follow written and verbal instructions
Comfortable working in a clean/controlled manufacturing environment

Job Duties entail but are not limited to:

Assemble medical kits according to detailed work instructions and quality standards
Package finished products for shipment
Label products accurately and ensure proper documentation
Prepare orders for shipping and distribution
Inspect materials and finished kits for accuracy and quality
Maintain a clean and organized work area
Follow all safety, cleanliness, and company procedures
Meet daily production and accuracy targets

Schedule:

Monday-Friday 8:30am-5pm

Pay:

$16/hour

]]> Thu, 07 May 2026 00:00:00 EDT 0 <![CDATA[Forklift Operator]]> We have a wonderful opportunity for Forklift Operator in Ranson, WV with the local manufacturer.

QUALIFICATIONS:

One year of forklift experience is preferred.
Working knowledge of basic math and inventory techniques preferred.
HSD/GED preferred.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

Move material in the process from one station to another.
Band, wrap, and/or pack finished goods and label as needed.
Will move finished goods from production area to inventory year or warehouse
Assist production with bottlenecks
Provide general preventive maintenance on equipment.
Complete pre-shift startup checklist and reports any issues as they arise.
Will complete production records as required.
Follow all forklift and safety policies as described by company policy
Will preform other duties as required

HOURS:

Weekend shift, Friday-Sunday, from 6am to 6pm.

PAY:

Pay starts at $18.00

#ISS

]]> Thu, 07 May 2026 00:00:00 EDT 0 <![CDATA[Carpenter]]> Position Summary:

A Commercial Carpenter is responsible for building and assembling structural frameworks and interior systems for a commercial building. Duties include reading blueprints, laying out and constructing metal framing, installing sheathing, drywall, doors, windows, and basic finish work. Carpenters ensure all work meets project specifications, safety standards, and building codes while collaborating with other trades on-site. The role requires strong knowledge of construction methods, proficiency with hand and power tools, and the ability to work in a fast-paced job site environment

Key Responsibilities:

Read and interpret blueprints, drawings, and project specifications
Measure, cut, and assemble metal framing
Install walls, floors, ceilings, and structural components
Hang drywall, doors, windows, and basic finish carpentry elements
Layout job site materials and ensure accurate placement of structures
Operate hand tools and power tools safely and efficiently
Follow all OSHA and job site safety regulations
Collaborate with project managers, supervisors, and other trades
Inspect work to ensure compliance with building codes and quality standards
Maintain a clean, organized, and safe work environment

Qualifications:

2+ years of commercial carpentry experience (new construction preferred)
Ability to read and interpret blueprints and construction drawings
Strong knowledge of framing, drywall, and general carpentry techniques
Proficient with hand tools, power tools, and measuring equipment
Understanding of building codes and job site safety
Ability to lift 50+ lbs and work in physically demanding conditions
Reliable transportation and ability to travel to job sites as needed
Strong attention to detail and problem-solving skills
Ability to work independently and as part of a team
Must have a REAL ID

Pay:

ranges from $23.03 - $28.00/hour

Schedule:

Monday-Friday 7am-3:30pm

#ISS

]]> Thu, 07 May 2026 00:00:00 EDT 0 <![CDATA[Machine Operator]]> We have a wonderful opportunity for machine operators in Inwood, WV with a local manufacturer.

QUALIFICATIONS:

Must have 1 year of manufacturing experience in a similar environment
Basic computer skills
Experience with hand tools, and other basic warehouse equipment

ESSENTIAL DUTIES AND RESPONSIBILITIES:

Will run and monitor multiple plastic injection molding machines to ensure consistent, high-quality production. Will adjust machine settings, cycle times, and parameters to maintain efficiency and minimize downtime. May identify and resolve common issues such as part defects, mold jams, or equipment malfunctions to keep production running smoothly.
Assist with maintenance and process technicians during machine start-up and shut-down procedures, ensuring all safety protocols are followed. Support mold changeovers by preparing equipment, verifying correct mold installation, and confirming proper alignment and setup before restarting production. Must work collaboratively to ensure quick and accurate transitions between product runs.
Inspect parts during production for quality, consistency, and conformance to specifications. Will perform visual checks and use measuring tools as required. Will accurately record production data, quality results, and any process adjustments in tracking systems or production logs to maintain traceability and meet audit requirements.
Adhere to all company safety policies and procedures, including the use of PPE. Will keep workstations organized and free from hazards by regularly cleaning machines, tools, and surrounding areas. Will report unsafe conditions or equipment concerns to supervisors immediately to help maintain a safe workplace.
Must demonstrate flexibility and teamwork by supporting additional tasks or departments when needed. You may assist with material handling, packaging, labeling, or supporting continuous improvement projects to enhance efficiency and quality.

HOURS:

12 hour days and nights, on a 2-2-3 schedule, 6am-6pm or 6pm-6am

PAY:

Pay starts at $18 on days and $19.20 on nights

]]> Wed, 06 May 2026 00:00:00 EDT 0 <![CDATA[Inside Machinist]]> We have an excellent opportunity for ten Inside Machinists in Norfolk, VA with one of our Clients in the Ship Repair Industry.

QUALIFICATIONS:

Must have ability to read and interpret blueprints, drawings, and other technical trade related documents.
Must have at least seven (7) years of experience operating manual OR CNC lathes and milling machines:
Manual Machinist experience as follows: Under minimal supervision, a manual machinist sets up and operates manually controlled machines in skilled precision and bench work in the fabrication, maintenance, repair, and alteration of machinery, machine parts, tools, and equipment.
CNC Mills & Lathes experience as follows: Requires knowledge of some CNC programming with the ability to perform minor program edits on the shop floor. Requires more than CNC operation experience.
Must have mechanical ability, manual dexterity, and hand/eye coordination required to perform various projects, per drawings, sketches, and verbal or written instructions.
Must be familiar with the use of precision measuring instruments: outside/inside micrometers, depth mics, venires, etc.
Must be able to write comprehensive Condition Found Reports (CFR) describing the material condition of the parts and assemblies being worked and recommendations for repair.
Must be familiar with threading and the various measuring/gauging requirements.
Must be skilled in the selection, set-up, and operation of the appropriate tool(s) for a given type of work.
Prefer Forklift and overhead crane experience.
Knowledge of Siemens controls preferred.
Experience with GibbsCAM software preferred.
Must have own tools.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

Perform complex operations on various machine tools, including drill presses, lathes, milling machines, boring machines, and precision grinding machines.
Measure, mark, and scribe dimensions and reference points on material or work piece as guides for subsequent machining.
Select, align, and secure holding fixtures, cutting tools, attachments, accessories, and materials on machines such as mills, lathes, jig borers, grinders, and shapers.
Perform the machining operations, watch for problems in the production process, and check the accuracy of the finished piece against blueprints / verify conformance of finished work piece to specifications.
Observe equipment to detect malfunctions or out-of-tolerance machining, adjust equipment controls as necessary, and verify accuracy of machine settings or programmed control data.
Set up and operate all types of shop machining tools or equipment to manufacture various parts.
Verifies dimensions and alignment of assembly, assembles parts into complete assembly.
Install machined replacement parts in mechanisms, machines, and equipment, and tests operation of unit to ensure functionality and performance.
Develops specifications from general description and draws sketch of part or product to be fabricated.
Work includes small and large assembly, and machining of heavy steel.
Apply knowledge of mechanics, shop mathematics, machinability of materials, and machine shop procedures
Perform machine maintenance and is responsible for keeping work are clean and the immediate reporting of safety issues to Supervisor.
Use various hand and power tools for the completion of job tasks.

HOURS:

First shift starts at 6AM. May work 8,10 or 12 hours shifts determined by the project.

PAY:

Local starts at $32/hour for 1st Class (Preferred)
Per Diem is offered for Non-local

#ISS

]]> Wed, 06 May 2026 00:00:00 EDT 0 <![CDATA[Welder]]> We have an exciting opportunity for Welding positions in Newport News, Virginia!

Job Duties entail but are not limited to:

Welding 5/16” thick dry dock cell wall plate after fit with single bevel groove welds flush
Welding either FCAW (Flux-core) or SMAW (Stick)
Grinding and cleaning any imperfections
All welds will be visually inspected
Must have experience using 60ft Ariel Boom Lift
Lift, carry, push and pull at least 80lbs
Help stock materials in and around the worksite
Help take trash off of the worksite

Qualifications:

Must have at least two years of SMAW and FCAW
Must be able to pass a plate test provided by Client in Suffolk, VA
Must have at least one year of shipyard experience
Must have at least two years of welding experience

Schedule:

Monday-Friday 6am-2:30pm
Overtime could be required on Saturday and Sunday

Pay:

Up to $30/hour

#ISS

]]> Tue, 05 May 2026 00:00:00 EDT 0 <![CDATA[Material Support Clerk]]> Experience:

Candidates must be able to bend, stoop, lift, manipulate, and place different types of material (pipe, fittings, vent, valves, insulation etc.) up to 50 lbs, and deliver to open spaces, confined spaces, and/or spaces at extreme heights onboard ship.
Must be able to walk, climb, crawl, bend, squat, and stand 8 hours per day and work in various work environments.

Required Skills:

Read, write, basic mathematics, customer service oriented, energetic, dependable, reliable.
Some knowledge of material storage and material picking systems.
Computer skills
Stocking experience
Warehouse management experience
Logistics experience

Pay:

$20.66 - $27.31/hour

Hours:

Must be open to any shift

#ISS

]]> Tue, 05 May 2026 00:00:00 EDT 0 <![CDATA[Yard Jockey Driver]]> Job Summary:

The Jockey Truck Driver is responsible for the organization of trailers on-site using the Yard Jockey truck. The position may require the use of a forklift for a percentage of the time.

Principle Duties and Responsibilities:

Safely drives in the facility staging shipping loads in various weather conditions
Completes daily equipment inspection sheets
Loads and unloads trucks as needed to assist with production
Inspects equipment to ensure safe operating conditions
Secures load and/or inspects load to ensure it has been properly secured
Performs duties consistent with all applicable Company rules
Conducts preventive maintenance to the truck and ensures it is clean
Maintains appropriate shipping documents as required
Maintains radio contact with base or supervisor to receive instructions on trailers/loads to be moved
Verifies shipping documents for accuracy
Completes paperwork as required
May operate a forklift to load/unload trailers as required
Follows forklift rules and policies as described by Company policy
Completes training as required by management
Participates in safety programs and meetings
Performs other duties as required

Qualifications:

Must be 18 years of age
Minimum 12th-grade basic education completed
A minimum of one year of experience driving a commercial vehicle or yard jockey truck is required
Working knowledge of vehicle parts, and how to handle minor repairs to ensure equipment is in proper operating condition
Successful completion of forklift driver licensing process within 4 months of hire
CDL license is not a requirement for this position
Ability to pass a driving test/skills evaluation in a yard jockey truck

Schedule:

Monday-Friday 3pm-12am.

Pay:

$18/hour

]]> Mon, 04 May 2026 00:00:00 EDT 0 <![CDATA[Labor]]> We have an immediate need for Utility Workers for our client in Gloucester County.

Roles and responsibilities include:

assist in repairing and replacing water mains and water lines.
Will be working under the direct supervision of utility supervisor using a variety of procedures and hand equipment.
Occasional weekends and rotate emergency on call.

Hours:

Monday â Friday
7AM â 330PM

Pay:

$17/hour

]]> Mon, 04 May 2026 00:00:00 EDT 0 <![CDATA[Firewatch]]> We have an exciting opportunity for a Firewatch position in Newport News, Virginia!

Job Duties entail but are not limited to:

Firewatch will assist hot work mechanics to look for incept stage fires and extinguish.
Must be able to climb/work from various heights (5 to 50 Ft.)
Lift, carry, push and pull at least 80lbs
Help stock materials in and around the worksite
Help take trash off of the worksite

Qualifications:

Must have at least one year of shipyard experience

Schedule:

Monday-Friday 6:30am-4pm
Saturday 6:30am-2:30PM
Overtime could be required on Saturday and Sunday

Pay:

$20/hour

#ISS

]]> Mon, 04 May 2026 00:00:00 EDT 0 <![CDATA[1st Class Shipfitter]]> Integrity Staffing has an exciting opportunity for 1st Class Shipfitters in the Houma, Louisiana area! This dedicated Shipfitter must have at least 6 months of shipfitting experience.

REQUIREMENTS 

Minimum of 6 months of ship fitting experience
Pass a hands-on craft test in accordance with craft classification
Proficiency in structural fitting processes
Perform layout and structural fitting processes accurately
Cut materials using a torch
Measure materials using metric measurements (cm, mm, etc.)
Must be able to cut and wash
Must be able to perform single pass SMAW welding

HOURS:

Monday â Friday 6AM â 430PM

PAY:

$24-$26

]]> Fri, 01 May 2026 00:00:00 EDT 0 <![CDATA[Construction Assembler]]> We have a wonderful opportunity for Construction Assembler in Winchester, VA with a local manufacturer.

QUALIFICATIONS:

Must be able to use basic hand and power tools
Must be able to lift up to 75 pounds
Must be able to work up to a 10 hour shift
Previous construction or assembly experience preferred

ESSENTIAL DUTIES AND RESPONSIBILITIES:

Will work in panels department making wall panels, cutting shapes for doors and windows.
Will perform insertion or positioning of materials, clamping, splicing, and fitting parts

HOURS:

1st shift available. 6am to 4:30pm, Monday-Friday

PAY:

Pay is between $16-$18 depending on experience

#ISS

]]> Fri, 01 May 2026 00:00:00 EDT 0 <![CDATA[Structural Welder (Offsite)]]> We have an exciting opportunity for a Structural Welder position in Newport News, VA with one of our Clients in the Ship Repair Industry.

Qualifications:

3-4 years of Structural Welding experience
Must be able to pass the Mig pulse test
Copper nickel experience
SMAW, GMAW, FCAW GMAW-P experience
Must be able to weld in all 3 positions (horizontal, overhead, and vertical)
Heating-Oxygen/propane heating torch
Air Carbon Arc Gouging
Fillet and butt welds
Can work in confined spaces and heights

Hours:

1st Shift-7am-3:30pm
2nd Shift-3:30pm-12:00Am
3rd Shift- 10:00pm-6:00am
Must be open to all shifts

Pay:

$45 Hr
$135 Per diem if you qualify

#ISS

]]> Fri, 01 May 2026 00:00:00 EDT 0 <![CDATA[1st Class Carbon Steel Pipefitter]]> We are hiring experienced Pipefitters to support the T-ATS (Towing, Salvage, and Rescue Ship) program, a U.S. Navy new construction project at a leading shipyard. This is a long-term opportunity supporting multiple vessels in production.

Position Overview:

Pipefitters will perform layout, fabrication, installation, testing, and repair of piping systems in a shipyard new construction environment.

Requirements:

Minimum 2+ years of carbon pipefitting experience
Must be able to pass a hands-on pipefitter test
Ability to bevel pipe using a grinder with a sanding disc
Ability to cut and saddle pipe of the same size at a 90-degree angle
Must be able to perform silver brazing of socket joint pipe in:
Horizontal position (flat and horizontal flow)
Vertical position (vertical up flow)
In accordance with ASME requirements
Shipyard or new construction experience preferred
Must be able to work in physically demanding conditions (heights, confined spaces, outdoor environment)
Strong work ethic and reliable attendance

Schedule:

Monday â Friday, 6:00 AM â 4:30 PM
Overtime and weekends may be required

Pay:

$26â$28/hour (based on experience

Additional Details:

Onsite test required for consideration
Long-term work supporting a multi-vessel Navy program

]]> Fri, 01 May 2026 00:00:00 EDT 0 <![CDATA[FCAW Structural Welders]]> We are hiring experienced Structural Welders to support the T-ATS (Towing, Salvage, and Rescue Ship) program, a U.S. Navy new construction project at a leading shipyard.

Job Summary:
Weld structural metal components using FCAW in accordance with blueprints, work orders, and specifications. This role supports new construction of Navy vessels, requiring a high level of craftsmanship and consistency.

Requirements:

Minimum 6 months FCAW 3G/4G structural welding experience
Must pass a hands-on FCAW 3G/4G weld test:
3G position (downhill progression)
4G position (overhead)
Previous shipyard or new construction experience preferred
Must pass drug screen and fit test
Strong work ethic and reliability

Work Environment:

Shipyard setting (outdoors, heights, confined spaces as needed)
Physically demanding role requiring lifting, climbing, and standing for extended periods

Schedule:

MondayâFriday, 6:00 AM â 4:00 PM
Overtime and weekends may be required based on workload

Pay:

$24â$26/hour (based on experience)

Additional Details:

Onsite weld test required for consideration
Long-term opportunity supporting a multi-vessel Navy program

]]> Fri, 01 May 2026 00:00:00 EDT 0 <![CDATA[Aluminum Pulse Welder]]> Integrity Staffing has an exciting job opportunity for Aluminum Pulse Welder in Houma, Louisiana!

Requirements:

Must be certified in 3G and 4G in at least 3 or more of the following disciplines preferred: flux core, short arc, aluminum, aluminum heliarc, stainless steel, carbon-to-stainless steel, and submerged arc
Must be able to make full penetration welds that will pass NDE Testing (i.e. x-ray, ultrasound, magnetic particles, dye)
Able to lay out track marks
Able to identify most used welding symbols
Examining his/her work and chipping off excess weld, slag, and splatter with the appropriate tools (i.e. grinder, chipping hammer, etc.)
Gouging/grinding to remove a member, make a seam sound, remove weld reinforcement, etc.

Hours:

Day and Night shifts available

Pay:

1st Class is up to $26.00/hour

]]> Fri, 01 May 2026 00:00:00 EDT 0 <![CDATA[Scheduler]]> We have a wonderful opportunity for a Scheduler in Norfolk, VA with one of our Clients in the Ship Repair Industry.

QUALIFICATIONS:

Must have experience with MS Projects
5+ yearsâ experience planning and scheduling fabrication projects using industry standards
Strong skills with planning programs, including MS Project and Primavera P6
Proven ability to identify and mitigate scheduling issues for simple and complex fabrication projects
Excellent verbal and written communication skills
Ability to tactfully deal with customers, coworkers & vendors as necessary.
Able to self-prioritize and self-start projects and task work
Ability to effectively multi-task similar activities in a fast paced, time sensitive environment
Must be able to read blueprints or drawings.
Must be a steady, reliable worker

ESSENTIAL DUTIES AND RESPONSIBILITIES:

Support project management teams and Planning Department by gathering, analyzing, preparing and submitting data necessary to develop and maintain project management tools
Work with Superintendents/Project Managers to create job schedules and update weekly with progress
Manage and maintain all phases of the production schedule; develop, recommend, review, implement, and maintain the tools and techniques necessary to analyze the impact of proposed schedule changes
Determine status of assigned projects / update and maintain project information data such as progress, manpower budget and project performance
Resource load production schedules based on bids and build plans
Create a master schedule to establish sequence and lead time of each operation to meet completion dates according to production forecasts or customer work specifications and drawing orders
Create and maintain schedules for steel processing site(s) and equipment
Create and maintain facility schedule to include footprint updates and progressing
Participate in craft planning and schedule reviews
Analyze production specifications and capacity data to determine manpower resource requirements
Develops standard and custom graphs and charts for project managers
Provide weekly schedule status reports on all projects to the Production Manager / Director.
When necessary, create bid schedules for estimators
Must have regular, reliable attendance
Work independently to complete responsibilities
Provide factual and timely information on all aspects and status of assigned jobs.
Perform other duties and special projects as designed.

HOURS:

First shift starts at 6AM and may work 8,10 or 12 hours shifts determined by the project.

PAY:

$30 - $32/Hour based on experience

]]> Fri, 01 May 2026 00:00:00 EDT 0 <![CDATA[Shipfitter - Advanced]]> We have an exciting opportunity for an Advanced Shipfitter position in Newport News, VA with one of our Clients in the Ship Repair Industry.

Qualifications:

Multi Pass tack welding
Must be able to Stick weld, 12 inch stick weld
Must be able to pass hair follicle drug test
Burning Oxygen/Propane burning torch
Heating Oxygen/propane hating Torch
Blueprint readings
Comprehend fractional dimensions
Air Carbon arc Gouging
Grinder and needle gun
Ability to comprehend complex structural assembly drawings, and sketches to include symbols, material type, datum and reference lines

Hours:

1st Shift-7am-3:30pm
2nd Shift-3:30pm-12:00Am
3rd Shift- 10:00pm-6:00am
Must be open to all shifts

Pay:

$45 Hr
$135 Per diem if you qualify

#ISS

]]> Fri, 01 May 2026 00:00:00 EDT 0 <![CDATA[1st Class 6G Tig/FCAW Pipe Welders]]> We are hiring experienced Pipe Welders to support the OSU project, a U.S. Navy program requiring a high level of precision and craftsmanship. This is a long-term opportunity supporting critical naval vessel work.

Position Overview:

Pipe Welders will prepare and weld pipe and fittings for various material types in accordance with construction drawings and technical guidance documents. This role requires a high level of accuracy and the ability to meet strict quality standards.

Requirements:

Minimum 1+ year of TIG/FCAW pipe welding experience
Must be able to pass a hands-on weld test:
6G position on 2” pipe with 3/32” wall thickness
Gas purge required with 1/8” root opening
All welds performed with uphill progression
Final weld completed using GTAW (TIG/FCAW)
Ability to read and interpret construction drawings and technical guidance documents
Strong understanding of welding procedures and best practices
Knowledge of safety protocols in a shipyard environment
Ability to work in physically demanding conditions (heights, confined spaces, outdoor environment)
Strong attention to detail and reliable attendance

Skills:

Proficient in TIG and Flux Core Arc Welding (FCAW)
Ability to produce high-quality welds meeting strict specifications
Strong problem-solving skills and ability to work independently or as part of a team

Responsibilities:

Prepare and weld pipe and fittings for various material types according to specifications
Ensure all welds meet required quality and inspection standards
Follow safety protocols and maintain a safe work environment

Schedule:

Monday â Friday, 6:00 AM â 4:30 PM
Overtime and weekends may be required

Pay:

$26-$28 hour (based on experience)

]]> Fri, 01 May 2026 00:00:00 EDT 0 <![CDATA[Ground Maintenance]]> We have a wonderful opportunity for groundskeepers/landscapers in Summit Point, WV with the local motorsports park.

QUALIFICATIONS:

Must be able to pass a background check
Must have valid Driverâs License
Previous groundskeeping, maintenance, and/or landscaping experience preferred

ESSENTIAL DUTIES AND RESPONSIBILITIES:

Weed eating
Will be building tire walls
Performing general maintenance around facility including painting, clean-up, and other seasonal grounds duties.

HOURS:

1st shift is 7am to 3:30pm

PAY:

Pay starts at $16.50

]]> Fri, 01 May 2026 00:00:00 EDT 0 <![CDATA[Warehouse Associate]]> Job Purpose:
The Warehouse Associate supports warehouse operations through the safe and efficient movement, processing, and distribution of donated goods. This role ensures quality standards are met, the warehouse remains organized, and customers and donors receive excellent service.

Key Responsibilities:

Assist with offloading trucks and transporting merchandise to sales areas
Organize incoming donations including unloading, sorting, packing, and staging items
Select goods suitable for resale based on established quality guidelines
Provide courteous assistance to customers and donors with purchases and donations
Maintain warehouse cleanliness, safety, and organization
Support cleaning and minor repair of donated items when needed
Ensure proper security of property, employees, and inventory
Perform additional duties as assigned to support overall store operations

Skills & Qualifications:

Ability to communicate effectively in-person, by phone, and in writing
Ability to safely move a variety of merchandise through busy spaces
Strong organizational skills and ability to prioritize tasks
Ability to work independently and collaboratively in a fast-paced environment
Strong customer service and interpersonal skills
High school diploma or equivalent preferred; relevant experience considered

Physical Requirements & Work Environment

Frequent standing, lifting (up to 100 lbs), bending, reaching, and moving merchandise
Work performed both indoors and outdoors in varying weather conditions
Safe operation of warehouse tools such as dollies, ladders, and lifting equipment
Must adhere to safety best practices at all times

Pay:

$15.00/hour

Schedule:

Must have open availability 7 days per week
Shifts:
- 7:30am-3:30pm
- 8am-4pm
- 12pm-8:30pm

]]> Wed, 29 Apr 2026 00:00:00 EDT 0 <![CDATA[Production Worker]]> Job Purpose:
The Production Associate â Sorter is responsible for processing donated goods efficiently and accurately to ensure high productivity, a safe work environment, and a strong customer experience. Items are evaluated for quality and routed for resale or recycle according to company standards.

Key Responsibilities:

Sort donated materials from carts while maintaining productivity standards
Make quick quality and cleanliness decisions on merchandise
Properly separate usable items into designated departments; route non-usable or recyclable items as directed
Sort a variety of goods including clothing, linens, accessories, shoes, and household items
Move and stage carts safely; request assistance as needed
Maintain a clean and hazard-free workstation
Demonstrate awareness of brand-name merchandise
Assist team members and other departments as needed

Physical Requirements & Work Environment:

Ability to stand, bend, reach, and lift up to 20 lbs. for extended periods
Work performed in a warehouse with concrete flooring
Role involves handling used items that may require use of personal protective equipment (PPE) such as gloves or masks when needed
Must maintain a neat, safe, and organized work area at all times

Pay:

$15.00/hour

Schedule:

Monday â Friday, 7:30 AM â 3:30 PM

]]> Wed, 29 Apr 2026 00:00:00 EDT 0 <![CDATA[Traveling Welder]]> We have an exciting new opportunity for a Traveling Welder in Portsmouth, Virginia!

Qualifications:

Must have active Secret Clearance
Must have a minimum of 6 years of welding experience in the trade
Must be willing to travel to multiple locations throughout the country
Must be able to certify to OII-MSD SMAW and GTAW weld procedures (documentation required)
Proficient in welding carbon and stainless steel piping and structural components.
Strong understanding of welding safety procedures, codes, and best practices (e.g., ASME, AWS standards).

Job duties entail but are not limited to:

Perform high-quality welds using SMAW and GTAW in accordance with OII-MSD weld procedures.
Interpret and work from technical drawings, blueprints, and welding symbols.
Prepare materials and surfaces for welding by cleaning, grinding, and fitting components.
Conduct visual and dimensional inspections of welds to ensure compliance with specifications.
Follow all company safety protocols and procedures while working in varied environments (field, industrial sites, confined spaces, heights).
Work collaboratively with site supervisors, QA/QC inspectors, and other trades to ensure project deadlines are met.
Maintain and calibrate welding equipment and tools as required.
Complete daily job logs, timesheets, and weld reports accurately and timely.

Schedule:

May work 8,10 or 12 hours shifts.

Pay starts at $33/hr plus Per Diem for those that qualify

#I08

]]> Wed, 29 Apr 2026 00:00:00 EDT 0 <![CDATA[Inside Machinist]]> We have an exciting opportunity for Inside Machinists in Chesapeake, Virginia for with one of our Clients in the Ship Repair Industry.

Qualifications

Must possess OSHA 10 certification
Must have a minimum of six (6) years of experience as an Inside Machinist in a shipyard, industrial, or defense manufacturing environment.
Must have journeyman-level skill with the ability to perform all machining tasks independently and without supervision.
Must be proficient in manual and CNC machining operations, including setup, programming, and operation.
Strong ability to interpret and work from complex blueprints, drawings, and technical manuals.
Expertise in machining a variety of materials and achieving tight tolerances and required surface finishes.
Working knowledge of feed and speed rates and machining characteristics of metals, alloys, and composites.
Ability to fabricate and use fixtures, jigs, and tooling as needed for custom parts.
Job Duties Include but not limited to
Set up and operate a variety of manual machine tools (lathes, mills, grinders, saws, etc.) to manufacture and repair mechanical components.
Program, set up, and operate CNC machines (lathes and mills) for precision machining operations.
Read and interpret blueprints, technical drawings, and specifications to determine dimensions, tolerances, tooling, and setup requirements.
Select appropriate cutting tools, speeds, and feeds for various materials and machining operations.
Measure, mark, and lay out workpieces to ensure accurate machining and assembly.
Use precision measuring instruments such as micrometers, calipers, height/depth gauges, and dial indicators to verify conformance to specifications.
Manufacture or modify parts from stock materials in accordance with engineering drawings and standards.
Maintain proper documentation of measurements, machining data, and work performed.
Maintain equipment and work areas in a clean, organized, and safe condition.

Hours:

First Shift: 6am-4:30pm
Second Shift: 4am-2:30pm
Schedule: Mandatory 50-hour work week (5 days × 10 hours)

Pay:

Pay starts at $35/hour

#ISS

]]> Wed, 29 Apr 2026 00:00:00 EDT 0 <![CDATA[Outside Machinist]]> We have an exciting opportunity for Outside Machinists at Norfolk Naval Shipyard in Portsmouth, Virginia with one of our Clients in the Ship Repair Industry.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

Must hold active security clearance
Must have 6 or more years of experience as a marine outside machinist
Dry dock experience on shafts, rudders, stabilizers and propellers is preferred.
Disassembles of various types of equipment and machinery common to maritime vessels and/or general industry including but not limited to pumps, valves, winches, gear boxes.
Assist in determining repairs and required to bring equipment to rebuild status.
Must be able to lift, carry and transport heavy equipment and boxes
Experience with valve overhaul and hull inserts
Installation of lift check valve
Testing main engines
Hydrostatic testing
Lube and oil flushing
Air conditioning hydro
Installation of valve and pump packing
Install turbine
Install boiler tube replacement
Fit and blue check liners
Install steam valves
Installation of hydraulic systems
Shafting and bearing work
Blueprint reading

HOURS:

May work 8,10 or 12 hours shifts determined by the project.

PAY:

$30 Hr +

#ISS

]]> Wed, 29 Apr 2026 00:00:00 EDT 0 <![CDATA[Pipe Welder]]> We have an exciting opportunity for a Pipe Welder position in Portsmouth Virginia!

Qualifications:

Have at least 2+ years of pipe welding experience in a marine environment
Must be able to operate manual or semi-automatic welding equipment to fuse copper and nickel segments, using processes such as open root and TIG fillet
Able to weld components in flat, vertical, or overhead positions.
Must be DBIDS Eligible
OSHA 10 Required
Knowledge, or experience and must pass qualification test for each process
Knowledge of a range of welding principles, processes, and techniques requiring complete penetration and fusion of base and filler metals.
Ability to maintain dimensions and tolerances to specifications, weld parts and structures that vary in size, shape and thickness.

Job Duties entail but are not limited to:

Use hand-welding or flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.
Ignites torches or start power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits.
Clamps, holds, tack-welds, heat-bends, grinds and/or bolts component parts to obtain required configurations and positions for welding.
Detects faulty operation of equipment and/or defective materials and notify supervisors.
Monitors the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking, distortion, or expansion of material.
Recognizes, sets up, and operates hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment.

Schedule:

Monday-Saturday 6am-2:45pm
Must be flexible on hours

Pay:

$28-$34/hr based on experience

]]> Wed, 29 Apr 2026 00:00:00 EDT 0 <![CDATA[Rigger Overhead Crane]]> We have an exciting opportunity for Rigger/Overhead Crane in Norfolk, VA with one of our Clients in the Ship Repair Industry.

Responsibilities:

Experience with operating overhead cranes
Must have knowledge of chain fall/strap loading
Must be able to rig large loads safely.
Underwater Hull propulsion rigging (rudders, propellers, fin stabilizers, shafts, etc.)
Knowledge of ship's structure, anchor chains and associated equipment, staging construction, cranes and their capacities/chart, ship's mooring
underwater hull rigging of shafting, propellers, rudders

Hours:

1st Shift â Starts at 6AM â may work 8,10 or 12 hour shifts
2nd Shift â Starts at 3PM â may work 8, 10 or 12 hour shifts

Pay:

Local - Up to $30/Hour depending on experience
Non Local-up to $27/Hour with $120 Per diem

]]> Fri, 24 Apr 2026 00:00:00 EDT 0 <![CDATA[Assembler]]> Job Description for Crating:

Wood working experience
Must know how to read a tape measure and use power tools (panel saw, table saw, drills, pneumatic nail guns, etc.)
Previous framing experience is recommended
Must be able to lift 50lbs
Able to stand for long periods of time
Prefers someone that is bilingual (Spanish and English)

Hours:

M-F 8-5PM

Pay:

$17.00 & up based on experience/interview

]]> Fri, 24 Apr 2026 00:00:00 EDT 0 <![CDATA[Print Production Specialist]]> We have an immediate need for a Print Production Specialist with our client in Richmond. This role will be working directly with customer service and production teams to ensure timely and accurate execution of print production functions.

Accountable for but not limited to:

Converting digital artwork for our proprietary digital press utilizing scripts, in-house procedures, and prior pre-press knowledge
Producing digital art work proofs for internal and external customers, including digitizing and vectorization of artwork when required
Maintaining all artwork databases while adhering to established naming and filing conventions
Ordering, receiving, and cataloging all new and reordered flexographic plates
Assisting inventory team with maintaining and managing plate storage
Developing, laying out, and revising label artwork for finished product rolls
Preparing, printing, and correlating all skid tags, proofs, and production orders for production team
Cultivating new color books, formulations, and procedures when presented with new substrates, inks, and workflow issues
Addressing after-hour issues from production team relating to artwork, labels, and plates
Advocating for cross functional collaboration between production, customer service, and QC teams, ensuring quality and pre-press standards are executed and maintained for all projects

Competencies:

Strong follow-up and follow-through, skilled with tracking processes and keeping up with timelines and deadlines
Great listener - ability to collect new information, retain and use for future success
Inquisitive and curious about how and why processes/workflows operate, knows when to ask questions
Excellent analytical and problem-solving skills
Attention to detail - able to review orders, identify and correct issues, and check and recheck to ensure quality output
Pro-active work style - anticipates issues and needs vs reactive
Understanding of 4 color process and spot colors, layout, typography, and flexographic plate making
Demonstrated experience with Adobe Creative Cloud 2017, proficient in Adobe Photoshop, Adobe Illustrator, Adobe Acrobat, and Adobe InDesign
Strong organizational skills and ability to prioritize workload
Desire for continuous process improvement, personal growth, and development of leadership skills

Preferred but not required:

SQL experience
SAP Business One experience

Experience:

2-3 years of relevant experience
High School degree or equivalent and associate level degree

Pay:

$23-$28/hour

Schedule:

Monday-Friday 7am-3pm and 3pm-11pm

#ISS

]]> Tue, 21 Apr 2026 00:00:00 EDT 0 <![CDATA[Machine Operator]]> Job Summary:
We are seeking a skilled and experienced JennerJahn Machine Operator to join our clients production team. In this role, you will be responsible for setting up, operating, and maintaining JennerJahn rewinding/converting equipment to ensure efficient production of high-quality finished materials. The ideal candidate has strong mechanical aptitude, excellent attention to detail, and the ability to troubleshoot mechanical and operational issues quickly. If you are passionate about production operations and thrive in a fast-paced manufacturing environment, we encourage you to apply.

Responsibilities:

Machine Setup & Operation
- Set up and calibrate JennerJahn equipment according to job specifications and production requirements.
- Operate and monitor the machine to ensure efficient, accurate, and continuous production.
- Adjust machine settings such as tension, alignment, and speed to maintain quality and meet production goals.
Quality Control
- Perform regular inspections of finished rolls and materials to ensure they meet quality standards.
- Monitor consistency, alignment, and material accuracy; make adjustments as needed.
- Identify, troubleshoot, and correct issues during production to minimize waste and maintain quality.
Equipment Maintenance
- Perform routine preventive maintenance to keep equipment in optimal working condition.
- Troubleshoot mechanical issues and perform minor repairs to reduce downtime.
- Collaborate with maintenance technicians for major repairs or scheduled maintenance.
Material Handling
- Load and unload paper or film rolls onto the JennerJahn machine.
- Ensure proper alignment, tracking, and feeding of materials throughout production.
- Manage material changes, splicing, roll handling, and scrap removal.
Safety & Compliance
- Follow all company safety procedures, machine-operation protocols, and PPE guidelines.
- Maintain a clean and organized work area to support a safe and efficient environment.
- Adhere to all regulatory and company standards related to machine operation and production.
Documentation & Reporting
- Maintain accurate records of job specifications, adjustments, downtime, and production counts.
- Complete shift reports, quality logs, and maintenance documentation as required.

Requirements:

Experience
- Previous experience as a JennerJahn Operator, Press Operator, or Machine Operator in a manufacturing or printing environment.
Technical Skills
- Strong mechanical aptitude with the ability to diagnose and resolve machine issues.
- Ability to understand and follow production orders, schematics, and specifications.
Attention to Detail
- Ability to spot quality issues and ensure material consistency throughout production runs.
Communication Skills
- Strong communication abilities to collaborate effectively with team members and supervisors.
Physical Requirements
- Ability to stand for extended periods, lift heavy materials, bend, reach, and perform repetitive tasks.

Pay:

$19-$22/hour

Schedule:

Monday-Friday 3pm-11pm and 11pm-7am

#ISS

]]> Tue, 21 Apr 2026 00:00:00 EDT 0 <![CDATA[CNC Waterjet Operator]]> We have an exciting opportunity for a CNC Waterjet Operator position in Austin Texas!

Qualifications:

Must have a high school diploma or equivalent
Must have a minimum of three (3) years of experience operating CNC waterjet cutting systems (OMAX preferred)
Must have strong mechanical aptitude and troubleshooting skills
Must have experience using Precision Measuring Instruments (PMI)
Ability to read and interpret engineering drawings and blueprints

Job Duties entail but are not limited to:

Set up and operate OMAX CNC waterjet cutting systems to produce parts to specification
Interpret engineering drawings, blueprints, models, and technical documents
Ensure proper tolerances, edge quality, and stock allowance for downstream machining
Perform complete machine setup, including material loading, fixturing, and program verification
Conduct in-process and final inspections using Precision Measuring Instruments (PMI)
Monitor machine performance and make adjustments as needed to maintain quality and efficiency
Perform routine maintenance and basic repairs on waterjet systems
Maintain a clean and safe work environment in compliance with company and safety standards

Schedule:

Monday-Friday 7am-5pm

Pay:

$20-$34/hour based on experience

#I08

]]> Mon, 20 Apr 2026 00:00:00 EDT 0 <![CDATA[Electrical AV Technician]]> Job Description

The Electrical and AV Systems Technician is responsible for the installation, programming, testing, troubleshooting and maintenance of the AV, Network and Electrical Systems during the production and service of all Coach units. This position requires regular hands-on work running cable, connecting components and performing quality control testing.

Essential Duties and Responsibilities:

Installation of A/V, Network, and Electrical Systems, to include running wiring
Loading of programming of coach control system software on coaches
QC testing of the coach AV controls
Updating of AV components
Trouble-shooting of AV issues
Identifying and updating programming of the coach control systems

Qualifications and Education Requirements:

Proven knowledge of luxury motorhomes and the operations of their electrical and AV equipment acquired from hands on experience
Formal training of automation systems from AMX, Spyder, RTI, Crestron preferred
Formal training in networking preferred
1-3 Years of experience implementing new AV and electrical automation systems
Knowledge of network and canbus systems
Knowledge of home automation systems

Equipment Used:

Standard office equipment; computer, printer, fax, multi-line phone
Wire cutters
Wire strippers
Data and coax crimpers and strippers
Electrical meters
Basic test equipment

Physical Requirements:

Ability to manually move, lift, carry, pull or push objects weighing up to 50lbs.
Ability to work within small spaces; coach underbays, behind cabinetry
Repetitive use of arms, hands and fingers.
Prolonged stooping, kneeling, walking and standing.
Close vision, distance vision, peripheral vision, depth perception and ability to adjust focus.
Ability to ascend/descend, work atop and use stairs/ladders
Ability to work in enclosed/tight spaces, and on secured motorhome roofs at various heights.

Experience:

Audio Visual: 3 years (Required)
Woodworking: 2 years (Required)
Electrical: 2 years (Required)
Network support: 1 year (Required)
Power tools: 3 years (Required)

Schedule:

10-hour shift
Monday- Thursday 7am-5:30pm with possible OT on Fridays
Ability to travel â up to 5%

Pay:

$19-22/hour

]]> Fri, 17 Apr 2026 00:00:00 EDT 0 <![CDATA[Pipefitter]]> We have an exciting opportunity for a Pipefitter position in Norfolk Virginia!

Qualifications:

Must be eligible to obtain DBIDS.
Minimum of 5 years of ship pipefitting experience, preferably in ship repair or industrial environments
Must have a high school diploma or equivalent; technical training or apprenticeship preferred
Strong ability to read and interpret complex piping drawings and schematics
Must have Advanced knowledge of piping systems, materials, and fabrication techniques
Experience with welding processes and pipe welding preparation
Ability to perform physically demanding work in industrial environments, including confined spaces and elevated areas

Job Duties entail but are not limited to:

Fabricate, assemble, install, and repair shipboard piping systems including hydraulic, pneumatic, fuel, water, steam, VCHT, and CHT systems
Interpret complex blueprints, isometric drawings, and technical specifications
Perform advanced pipe layout, cutting, threading, bending, and fit-up
Install valves, hangers, supports, and associated piping components
Conduct pressure testing, leak detection, and air/hydrostatic testing
Diagnose and troubleshoot piping system issues and perform necessary repairs
Plan work sequences, materials, and execution to meet project schedules
Coordinate work with welders and other trades to ensure proper system integration
Lead and mentor junior pipefitters and apprentices, providing technical guidance
Ensure all work complies with applicable codes, standards, and safety regulations (including OSHA)

Schedule:

Monday-Friday 6am-2:45pm

Pay:

$27-$33/hour based on experience

]]> Fri, 17 Apr 2026 00:00:00 EDT 0 <![CDATA[Maritime Engineer]]> Our clients Maritime and Ships Division is at the center of their maritime consulting work. They apply world‑renowned, state‑of‑the‑art technologies to tackle complex challenges across ports, waterways, and marine environments worldwide.

They are expanding their presence in North America and are seeking a Principal Level Maritime Engineer to join their Houston‑based team and take a leadership role in ship navigation and mooring related consultancy projects.

Role Overview:

This position requires expertise in project management, scientific analysis, engineering skills, and a strong understanding of the coastal and marine environment.
You will be responsible for leading ship navigation simulation and mooring studies for port, harbor, terminal and waterway design using state-of-the-art ship and tug simulators to assess and improve ship navigation safety and efficiency. Collaborating with multidisciplinary teams, you will ensure the delivery of high-quality project outcomes. Effective communication with clients globally will be crucial, as you will need to understand their requirements and deliver solutions that meet their needs. Engaging in innovative research and development activities will support the growth of ship navigation, mooring and other engineering services. Furthermore, you will contribute to business development efforts by procuring and winning new projects as well as cultivating relationships with national and international clients.
Your expertise and leadership will play a vital role in advancing capabilities and maintaining our clients position as a leading provider of ship navigation and mooring solutions in the marine industry.
This is an exciting opportunity to be part of a dynamic, international consultancy that works on technically challenging and rewarding maritime projects around the world.

Key Responsibilities:

Lead and support ship navigation and mooring simulation studies using advanced simulator technology.
Develop engineering analyses and recommendations to improve navigational safety and operational efficiency.
Collaborate with multidisciplinary teams across the organization to deliver high‑quality project outcomes.
Build and maintain strong, positive relationships with clients, stakeholders, and project partners.
Contribute to research and development activities to advance our maritime engineering capabilities.
Support business development by identifying opportunities, preparing proposals, and participating in client meetings.
Represent the company at client presentations, technical meetings, and industry events.
Travel within the U.S. and internationally as project needs require.

Required Qualifications

Masterâs degree in Civil, Coastal, Maritime*, Ocean Engineering, Naval Architecture* or a closely related field.
Must have experience with navigation and mooring
5-10+ years of experience required in a relevant consulting environment, equivalent professional experience relevant to the role will also be considered
Professional Engineer (PE) license.
Proven experience of ship navigation, ship mooring in port and marine terminal development engineering or consultancy projects.
Excellent interpersonal and communication skills, with the ability to manage client relationships and respond to time-sensitive issues
Ability to work independently while collaborating inclusively within multidisciplinary teams.
Demonstrated problem‑solving and critical‑thinking abilities.
Willingness to travel domestically and internationally.

Preferred Qualifications

Experience working with federal agencies (e.g., USACE, DoD).
Experience with programming languages such as Python.
Experience in business development or client engagement activities.

Salary range:

Senior Maritime Engineer: $125,000-$150,000
Principle Maritime Engineer: $165,000 - $180,000 dependent on experience

Schedule:

Flexible work arrangements, including partial remote options, may be available depending on experience.

]]> Thu, 16 Apr 2026 00:00:00 EDT 0 <![CDATA[Tile Mechanic]]> We have an exciting new opportunity for a Tile Mechanic in Portsmouth Virginia!

Qualifications:

Must be able to obtain DBIDS
Must have experience with Ceramic or Composite tile installation, masonry, or hardscape installation
Must be able identify and measure material.
Must be able to calculate basic figures.
Must be able to carry out instructions furnished in oral, written, or diagram form.
Must be able to problem solve, organize, and prioritize work.
Must be able to perform required duties efficiently and independently.

Job Duties entail but are not limited to:

Ensure work is done safely and meets quality standards.
Ability to perform carpentry-type duties to include use of manual tools, power tools, and building of containments.
Read and interpret documents as necessary, such as operating and maintenance manuals, safety rules and regulations, procedure manuals, etc.
May prepare molds and templates for fabrication of hull treatment.
Maintain a clean work environment where coatings work is being performed.
Demonstrate comprehension of complex shapes and the ability to understand symmetrical gaps both parallel and perpendicular to the ships surface shape.
Mixing of different types of solvent and adhesive materials.
Use of troweling tools and adhesives, and work with equipment specific to hull treatment installations
Understanding fairness and flushness with regards to surface preparation.
Follow all company rules and policies.
Provide a great level of attention to detail and focus on the given task.
May be required to perform additional duties as deemed necessary by the Superintendent.
Must be willing to comply with clean shaven standards needed to wear half/full face respirator.
Must be able to pass a thorough background investigation to obtain access into a shipyard environment.

Schedule:

May work 8,10 or 12 hours shifts.
Must be flexible to work OT

Pay:

$20-$26 per hour based on experience

]]> Tue, 14 Apr 2026 00:00:00 EDT 0 <![CDATA[CNC Mill Machinist]]> Our client is seeking an experienced CNC Mill Machinist to join their growing manufacturing team. This role is responsible for setting up, programming (if applicable), and operating CNC milling machines to produce precision parts in accordance with engineering drawings and specifications.

Qualifications:

Must have at least 5+ years of CNC milling experience in a manufacturing environment
Must have experience with CAM software (e.g., Mastercam, Fusion 360, or similar)
Must have experience working with a variety of materials (steel, aluminum, stainless, etc.)
Strong knowledge of G-code and CNC machine operations
Experience with setup and editing programs (programming experience a plus)
Ability to read and interpret blueprints and specifications
Familiarity with precision measuring tools (micrometers, calipers, gauges)
Experience holding tight tolerances (+/- .001 or better)
Strong problem-solving skills and attention to detail
Ability to work independently and as part of a team

Key Responsibilities:

Set up and operate CNC milling machines (3-axis and/or 5-axis preferred)
Interpret blueprints, technical drawings, and GD&T requirements
Select appropriate tooling, speeds, and feeds for materials and job requirements
Perform first-piece inspections and in-process quality checks
Adjust machine offsets and tooling to maintain tight tolerances
Deburr, finish, and inspect completed parts to meet quality standards
Maintain accurate production and inspection records
Perform routine machine maintenance and troubleshooting
Collaborate with programmers, supervisors, and quality personnel

Schedule:

Monday â Thursday, 6:00 AM â 4:30 PM
Friday, 7:00 AM â 11:00 AM

Pay Range:

$35.00 â $40.00 per hour (based on experience)

#ISS

]]> Tue, 14 Apr 2026 00:00:00 EDT 0 <![CDATA[CNC Machinist]]> Position Summary:

The Machinist will operate machine tools to fabricate and manufacture machine parts. Our client is a growing service-oriented company that provides machine shop, fabrication shop, and industrial services. They serve customers in many different industries including manufacturing, industrial, agricultural, commercial, and residential. We are seeking a Machinist with CNC and manual machining skills to join their team.

Qualifications:

Must have 1+ year of experience programming and operating CNC and manual lathes and mills
High school diploma or equivalent required
Vocational/technical school training or apprenticeship preferred
Understanding of materials, cutting tools, speeds and feeds, and machining techniques
Experience working with ferrous metals, non-ferrous metals, and plastics
Detail oriented; attentive to accuracy, efficiency, and neatness
Ability to lift 35+ pounds
Prolonged periods of standing and bending required.

Key Responsibilities:

Setup, operate, and program CNC lathes and mills
Setup and operate manual lathes and mills
Read and interpret shop drawings and design sketches to ensure proper dimensions and specifications for parts
Select the appropriate cutting tools, attachments, accessories, and materials to be used on machines
Prepare materials by means of saw cutting, surface grinding, sanding, and deburring
Adjust speeds and feeds and machining techniques as deemed necessary
Examine and measure completed units and parts to identify any defects and to ensure units conform with predetermined specifications; adjust machine controls to resolve production errors
Modify machines to control speed, material feed, or path of cut as required to ensure a quality product is produced with specifications
Inspect machinery for any needed repairs; performs minor repairs within expertise
Maintain a safe, clean, and well-organized workspace
Comply with applicable safety standards and regulations
Perform other related duties as assigned

Schedule:

Monday-Thursday 6am-4:30pm, Fridays 6am-3:30pm

Pay:

$20-$30/hour based on experience

#ISS

]]> Wed, 08 Apr 2026 00:00:00 EDT 0 <![CDATA[Industrial Field Service Technician]]> Our client is a growing industrial services and fabrication company supporting heavy industrial, quarry, manufacturing, and plant operations throughout the region. The field division specializes in keeping production facilities running safely and efficiently. We are seeking an experienced Industrial Field Service Mechanic with strong mechanical and fabrication skills to join the team.

Position Summary:

The Industrial Field Service Mechanic performs on-site diagnostics, repair, installation, maintenance, and fabrication of heavy industrial machinery at customer sites. This position requires troubleshooting expertise, mechanical aptitude, and the ability to work safely and independently in demanding industrial environments.

Qualifications:

Must have mechanical aptitude
Welding and fabrication skills highly preferred
Ability to work in physically demanding industrial environments
Valid driverâs license with clean driving record
Ability to lift 50+ lbs and work at heights or in confined spaces when required
Strong troubleshooting and problem-solving skills
Self-motivated and dependable

Key Responsibilities:

Weld and fabricate at customer sites
Repair machinery and equipment
Troubleshoot equipment malfunctions
Work with hand and power tools
Work with measuring and alignment tools
Perform routine preventative maintenance
Read machine and/or procedure manuals
Daily travel to customer facilities
Perform plant shutdown maintenance and emergency breakdown repairs
Install industrial machinery
Follow all company safety policies and OSHA regulations

Schedule:

Monday-Friday 6am-4pm
Averaging about 45 hours per week
Schedule can vary based on client demand
Weekend work is available

Pay:

$20-$30/hour based on experience

#ISS

]]> Wed, 08 Apr 2026 00:00:00 EDT 0 <![CDATA[Structural Welder]]> We have an exciting opportunity for Structural Welders in Norfolk,VA with one of our Clients in the Ship Repair Industry.

Qualifications:

Minimum 4-7 years of experience
Must be able to demonstrate ability to perform multi-pass, all position fillet and butt welds using SMAW (Shielded Metal Arc Welding), GMAW (Gas Metal Arc Welding)< and FCAW (Flux Cored Arc Welding)
Knowledge of welding techniques (oxygen-acetylene, electric arc, and TIG), tools and equipment
Technical training preferred
Knowledge of and ability to use hand tools and instruments associated with the trade
Must be able to work effectively with others
Comprehend blueprints, sketches, and templates
Enter and move through manholes to reach and work in internally confined spaces

Responsibilities:

Weld together metal components of products, as specified by layout, blueprints, diagram, work order, welding producers, or oral instructions, using electric arc-welding equipment
Prepare all material surfaces to be welded, ensuring that there is no loose or think scale, slag, rust, moisture, grease, or other foreign matter
Weld completion in flat, horizontal, vertical, or overhead positions
Operate manual or semi-automatic welding equipment o fuse metal segments, using processes such as gas tungsten arc, gas metal arc, flux-cored arc, plasma arc, shielded metal arc, resistance welding, and submerged arc welding
Manually apply filler rod to supply weld metal
Clean or degrease weld joint or work piece, using wire brush, portable grinder, or chemical bath. May repair broken or cracked parts and fill holes
Set up and operate welding equipment and select proper electrodes according to metals to be joined or as instructed
Preform grinding and joint preparation for NDT processes
Burning, washing, edge prepping using hand and automated equipment
Flux cored inner shield and dual shield welding along with oxy-acetylene torching, air-arc, weld-wire gas, stick and pipe flange
Construct or repair metal products by joining parts either manual (using a variety of welding methods including electric arc, MIG and TIG welding or oxy-acetylene welding) or by machine
Read and understand the Chemist and Competent Persons reports and determine if job sites, particularly those involving combustible material, are safe for personnel and hot work
Preforms grinding and joint preparation for NDT processes
Mark or tag material with proper job number, piece marks, and other identifying marks as required
Will be required to wear personal protective equipment â hard hat, safety glasses, steel toe boots/shoes and, when necessary, respirator

Hours:

1st Shift â Starts at 6AM â may work 8,10 or 12 hour shifts
2nd Shift â Starts at 3PM â may work 8, 10 or 12 hour shifts

Pay:

Local - Up to $30/Hour depending on experience

]]> Thu, 02 Apr 2026 00:00:00 EDT 0 <![CDATA[Shipfitter]]> We have an exciting opportunity for Shipfitters in Norfolk,VA with one of our Clients in the Ship Repair Industry.

1st, 2nd, and 3rd Class

Qualifications:

Minimum of 4-5 years of Fitting experience
Must pass tack test
Technical training preferred
Knowledge of and ability to use hand tools and instruments associated with the Fitting trade
Must be able to work effectively with others
Comprehend blueprints, sketches, and templates.
Enter and move through manholes to reach and work internally confined spaces
Must take & pass tack weld test

Responsibilities:

Template creation
Working with presses, floor shaping, forming plates, shaping from templates, marking symbols, doors, hatches and scuttles, rolls, presses and blacksmith shop
Laying out blueprints, checking and fitting materials, tack welding of small assemblies, aluminum and steel foundations and outfitting items
Laying out blueprints, checking and fitting materials, tack welding of various sub-assemblies peculiar to the panel line and shell area such as: decks, bulkheads, side shells.
Installation of structural outfit items, doors, ladders, foundations
Effective sequencing of assembly and fitting
Correct use of heating torches in plate heat straightening and shrinkage
Ability to use hand and power tools
Shop and field fabrication
Adherence to industry codes, regulations and specifications
Comprehend blueprints, sketches, and templates
Tack welding
Install simple systems without templates and blueprints
Riveted joint repairs
Read and understand the Chemist and Competent Persons reports and determine if job sites, particularly those involving combustible material, are safe for personnel and hot work
Other duties as assigned
Will be required to wear personal protective equipment- hard hat, safety glasses, steel toe boots/shoes and, when necessary, respirator
Work independently to complete responsibilities
Must have regular, reliable attendance

Hours:

1st Shift â Starts at 6AM â may work 8,10 or 12 hour shifts
2nd Shift â Starts at 3PM â may work 8, 10 or 12 hour shifts

Pay:

Local - Up to $30/Hour depending on experience

]]> Thu, 02 Apr 2026 00:00:00 EDT 0 <![CDATA[Stage Builder]]> We have a wonderful opportunity for a Stage Builder position in Newport News, VA with one of our Clients in the Ship Repair Industry.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

Erect, modify, inspect, and dismantle all types of staging and scaffolding systems in accordance with shipyard safety regulations and engineering requirements
Ensure staging structures are secure, stable, and suitable for use by other trades and personnel
Perform routine maintenance and adjustments to existing staging as project needs evolve
Work effectively at elevated heights, over water, and in tight or confined spaces such as tanks, compartments, and hull sections
Follow all safety procedures, including fall protection, confined space protocols, and hazard recognition
Collaborate with supervisors and team members to complete assignments efficiently and on schedule
Maintain tools and equipment in safe working condition
Must be able to lift and carry over 40 pounds

HOURS:

1st Shift-7am-3:30pm
2nd Shift-3:30pm-12:00Am
3rd Shift- 10:00pm-6:00am
Must be open to all shifts

PAY:

$22-$27.31/Hour based on experience; Per Diem is offered for Non-local

]]> Tue, 17 Mar 2026 00:00:00 EDT 0 <![CDATA[Deckhand]]> We have an exciting opportunity for a local/Nonlocal Deck Hand position in Newport News, VA with one of our Clients in the Ship Repair Industry.

Qualifications

Preparing all necessary towing gear is in good order, properly stowed, and ready for use
Ensuring that tug and barge equipment is in good operating condition
Making sure barges are moored safely along piers and ships
Making sure all hatches are properly secured to prevent ingress of water
Knowing where all emergency equipment is located and ensuring first aid kit is fully stocked
Act as lookout during the navigation of a tug
Perform periodic checks of the engine room and including the bilges, fluid levels on main and auxiliary engines and gear boxes, and battery water levels
Keep all areas of the tug in clean, organized, and safe condition

Hours:

Must be open to all 3 shifts
1st shift-7am-3:30pm
2nd 3:30pm-12am
3rd shift 11pm-7am

Pay:

$22-$27.31 Hour
$135/day per diem for those who qualify

]]> Fri, 13 Mar 2026 00:00:00 EDT 0 <![CDATA[Metalwork Painter]]> We have a wonderful opportunity for Metalwork Painters in Harpers Ferry, WV for a government contractor.

QUALIFICATIONS:

Must have prior hands-on experience painting metal surfaces, especially steel, not just walls or wood.
Must be comfortable using spray guns and related equipment and know how to get an even, professional finish.
This job is performed outside and sometimes in cold temperatures. Candidates must be able to work safely and consistently in these conditions.
Candidates must show up on time, pay close attention to quality, be reliable, and follow safety rules at all times.
Candidates must be able to take instructions well, but also step up to guide others or take charge of tasks when required.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

Will spray-apply coatings to metal guardrails, handrails, and fabricated steel components
Will prepare surfaces according to manufacturer specs and project standards
Will ensure proper use, maintenance, and cleanup of spray-painting equipment
Will assist with or lead on-site operations as needed
Must follow strict safety and cleanliness standards required on government job sites.
Will help get the job site ready at the start and ensure everything is cleaned up properly at the end.

HOURS:

8am-5pm, Monday through Friday
Contract based assignment lasting approximately 2-4 weeks per contract.

PAY:

Pay ranges from $34 to $41.25 an hour depending on experience.

]]> Fri, 13 Mar 2026 00:00:00 EDT 0 <![CDATA[Machinist O/S]]> We have a wonderful opportunity for Outside Machinists in Newport News, VA with one of our Clients in the Ship Repair Industry.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

Installation of hull inserts.
Ability to comprehend complex drawings, blueprints, diagrams, and sketches.
Use of lapping and blue checking tools.
Working knowledge of shipbuilding terms and nomenclature.
Valve overhaul (steam and wog) AC & refrigeration repair
Installation of lift check valve.
Steam plant cleanliness knowledge
Installation of main engine, propulsion plant machinery and equipment.
System cleanliness grade knowledge.
Installation of aircraft elevator.
Testing main engine.
Hydrostatic testing
installation of anchor windlass.
Installation of mast and antenna.
Lube oil flushing.
Installation of arresting gear.
Installation of noise equipment
Installation of sea valves.
System Grooming Operate boring bar.
Installation of VALVE AND PUMP packing.
Valve overhaul. Operate cargo crane.
Operate portable milling/drill machine.
Generator and steam turbine work.

HOURS:

1st Shift-7am-3:30pm
2nd Shift-3:30pm-12:00Am
3rd Shift- 10:00pm-6:00am
Must be open to all shifts

PAY:

$22 - $27.31/Hour based on experience; Per Diem is offered for Non-local

#ISS

]]> Thu, 12 Mar 2026 00:00:00 EDT 0 <![CDATA[Rigger]]> We have an exciting opportunity for a local/Nonlocal Rigger position in Newport News, VA with one of our Clients in the Ship Repair Industry.

Qualifications:

Familiarity with Stage building
Knowledge Shipes and valves, to pumps, motors and electronic equipment, to the largest machinery and structural components â riggers can lift, manipulate, and set them into place
Able to calculate the weight and center of gravity of the item being handled, determine the capacity of the lift points, and calculate the angle imposed on the handling gear to select the most appropriate gear for the task at hand
Erect, maintain, and dismantle various types of scaffolding throughout the shipyard.
Must be able to calculate weight and center of gravity
Determine capacity of the lift points
Calculate angle imposed on the handling gear

Hours:

Must be open to all 3 shifts
1st shift-7am-3:30pm
2nd 3:30pm-12am
3rd shift 11pm-7am

Pay:

$22-$27.31 Hr
$135 Per diem if you qualify

#ISS

]]> Thu, 12 Mar 2026 00:00:00 EDT 0 <![CDATA[Grinding Machine Operator]]> We have an exciting new opportunity for a Grinding Machine Operator in a CLIMATE CONTOLLED SHOP in Newport News!

Qualifications:

Must have understanding of basic math skills (adding/subtracting, decimals and fraction equivalents)
Must demonstrate basic mechanical aptitude
Must be able to be on feet for extended periods of time and lift upwards of 50 lbs

Job Duties entail but are not limited to:

Ability to fill out paperwork in the correct manner (accurately).
Attention to details
Ability to record and follow written and verbal instructions.
Operate machinery in a safe manner
Maintain equipment and cleanliness of work area.

Schedule:

Monday-Friday 7am-3:30pm
Must be flexible to work OT

Pay:

$17-$19 per hour based on experience

]]> Fri, 06 Mar 2026 00:00:00 EST 0 <![CDATA[Scanner Technician]]> Summary of Position

The Scanning Technician operates a high-speed scanning machine to make digitized copies of documents. This position converts paper documents to digital images using scanning equipment.

Essential Duties and Responsibilities

Responsible for the operation of high-speed scanning equipment.
Convert high volumes of hard copy files into quality digital images.
Responsible for verifying the accuracy, clarity and completeness of all digitized documents. To include:
Image Quality: clear and legible text, no blurriness, skewing, proper brightness and contrast, correct page orientation, rotation of images, correct resolution (300 DPI)
Scanned File Completeness: All pages scanned, no missing, duplicated or cut-off pages
Evaluates documents to ensure all output meets strict quality control standards.
Ability to consistently maintain set production quotas.
Highly detailed oriented, with great attention to quality output, data integrity and adherence to a production quota.
Follows all security and privacy policies, standards and guidelines to protect the informational assets of both the company and their customers.
Other duties specified by your Lead/Supervisor

Qualifications

High school diploma or equivalent.
Ability to work independently in a fast-paced environment with minimal supervision.
Proficiency in reading, writing, and communicating in English.
Flexibility to work overtime (OT) or weekends as needed.
Ability to lift 30 - 50 lbs.
Ability to maintain confidential information.
Must have US Citizenship or be a Lawful Permanent Resident
Must have registered with the Selective Service (Males only)
Must be Federal Tax Compliant
Must be able to obtain and maintain a government clearance

Schedule:

Monday-Friday 9am-6pm or 12pm-9pm

Pay:

$23.59/hour ($18.50/hour + $5.09 Health & Wellness)

#ISS

]]> Thu, 26 Feb 2026 00:00:00 EST 0 <![CDATA[Event Laborer]]> Position Summary:

The Athletics Event Laborer supports our client by performing a variety of tasks related to the moving, delivery, setup, and storage of equipment, and other items across campus to set up for games taking place on campus. This role is vital in supporting campus relocations, event setups, surplus inventory management, and general logistical support for departments and facilities.

Key Responsibilities:

Load, transport, and unload equipment, boxes, and other items between campus buildings, stadiums and storage facilities.
Set up and break down of equipment for campus events, meetings, and special functions.
Manage storage inventory, including organizing, labeling, and tracking items in storage facilities.
Deliver packages, surplus items, and equipment across campus as requested.
Follow proper safety procedures for lifting, loading, and transporting items.
Perform basic assembly/disassembly as needed.
Maintain cleanliness and organization of the moving and storage areas.
Respond to work orders and service requests in a timely and professional manner.

Qualifications/Requirements:

High school diploma or GED
Valid Virginia driverâs license with a satisfactory driving record
Ability to lift, carry, push, and pull up to 75 lbs. repeatedly
Experience operating moving equipment safely and efficiently
Strong organizational and time management skills
Ability to work both independently and as part of a team
Basic mechanical aptitude for furniture assembly/disassembly
Preferred:
Previous experience in a moving, warehouse, or facilities environment
Familiarity with college or university campus operations
CDL or forklift certification a plus

Working Conditions:

Frequent standing, walking, bending, lifting, and carrying heavy items.
Indoor and outdoor work in varying weather conditions.
May require early morning, evening, or weekend shifts to support campus events and move schedules
You will be responsible for your own parking fees of $21.00 per month.

Pay:

$12.77/hour

Schedule:

Monday-Friday 7:30am-4:30pm

]]> Thu, 26 Feb 2026 00:00:00 EST 0 <![CDATA[Document Preparation Technician]]> Summary of Position

The Document Preparation Technician, under general supervision, will prep and perform a quality check of hard copy records.

Essential Duties and Responsibilities

Process and prepare a high volume of hard copy records for scanning, ensuring all documents are correctly sorted and prepped for efficient conversion.
This can include classifying easily recognizable documents, orienting pages, repairing and removing objects such as staples and paper clips from documents.
Removes various format documents and folders from boxed content and prepares them by unfolding corners, taping down small pieces of paper onto larger sheets. Placing patches or bar code separators in between records for scanning.
Performs quality review of the prepared records prior to handing them off to scanning technician to ensure accuracy and completeness of the paper files.
Ability to consistently maintain production quotas while sustaining high levels of quality.
Follows the security and privacy policies, standards and guidelines to protect the informational assets of both the company and their customers.
Other duties as specified by your Lead/Supervisor.

Qualifications

High school diploma or equivalent.
Highly detailed oriented with great attention to quality output and adherence to a production quota.
Proven ability to work independently with minimal supervision and maintain a focused pace to meet production rates and quality targets.
Proficiency in reading, writing, and communicating in English.
Flexibility to work overtime (OT) or weekends as needed.
Ability to lift 30 â 50 lbs.
Ability to maintain confidential information.
Must have US Citizenship or be a Lawful Permanent Resident
Must have registered with the Selective Service (Males only)
Must be Federal Tax Compliant
Must be able to obtain and maintain a government clearance

Schedule:

Monday-Friday 7:30am-3:30pm

Pay:

$23.34/hour
- $18.25/hour + $5.09 Health & Wellness

#ISS

]]> Thu, 19 Feb 2026 00:00:00 EST 0 <![CDATA[Mech Tech - Pipe Welder]]> We have an exciting opportunity for a Pipe Welder position in Gosse Creek, SC with one of our Clients in the Ship Building Industry.

Qualifications

4-5 years of Pipe Welding experience
Must be able to pass hair drug test
Must have Shipyard experience
Multi-pass. All position fillet and butt welds using the SMAW (Shielded metal arc) process
Ability to fuse inserts and weld carbon steel, stainless steel and copper nickel pipe using the SMAW and GTAW (Gas Tungsten Arc Welding) processes
Mirror welding using SMAW and GTAW
Use fillet gauges, butt gauges, and a six-inch scale
Heating oxygen/propane heating
Ability to fuse inserts and weld carbon steel, stainless steel and copper nickel pipe
Thin wall socket (0.187 wall joints)
Performs welding process on steel parts and assemblies to required tolerance using welding metals and metal alloys
Determine layouts and welds parts and assemblies according to engineering drawing and specifications

Hours:

1st Shift-7am-3:30pm

Pay:

$50 Hr
$135 Per diem if you qualify

#ISS

]]> Wed, 11 Feb 2026 00:00:00 EST 0 <![CDATA[Mech Tech - Shipfitter]]> We have an exciting opportunity for a Shipfitter position in Goose Creek, SC with one of our Clients in the Ship Building Industry.

Qualifications

4-5 years of Shipfitter experience
Shipyard experience
Must be able to pass hair follicle drug test
SMAW-3F, 4F plate test. 3/8” thickness
Burning Oxygen/Propane burning torch
Heating Oxygen/propane heating Torch
Lays out, fits, aligns, and assemble prefabricated cast and forged components prior welding, soldering, brazing, and bonding operations.
Performs fitting and machining operations such as straighten, grind, burr, drill, ream, and countersink materials to close tolerance.
General instructions to select equipment, set up, and lay out materials to be welded
Comprehend fractional dimensions
Air Carbon arc Gouging
Grinder and needle gun
Ability to comprehend complex structural assembly drawings, and sketches to include symbols, material type, datum and reference lines

Hours:

2nd Shift-3:30pm-12:00am

Pay:

$45 Hr
$135 Per diem if you qualify

#ISS

]]> Wed, 11 Feb 2026 00:00:00 EST 0 <![CDATA[Electro-Mechanical Maintenance Technician]]> We have an exciting new opportunity for an Electro-Mechanical Maintenance Technician for a client in Norfolk Virginia!

Qualifications:

Must have Associate degree in Industrial Maintenance, Electromechanical Technology, or a related field
3+ years of electro-mechanical maintenance experience
Strong knowledge of electrical systems (AC/DC motors, sensors, PLCs)
Must have strong knowledge of mechanical components (bearings, belts, pulleys, gearboxes)
Experience with rotary contact screw air compressors preferred
Proficiency using diagnostic tools, multimeters, hand tools, and power tools
Ability to work independently, prioritize tasks, and respond quickly to equipment failures
Ability to lift 50+ lbs
Ability to sit or stand for extended periods
Strong problem-solving skills
Ability to manage multiple priorities

Job Duties entail but are not limited to:

Equipment Maintenance & Repair:
Perform scheduled and unscheduled maintenance on electro-mechanical equipment, including motors, drives, sensors, PLC-controlled systems, and pneumatic equipment.
Conduct routine maintenance and troubleshooting of air compressors, heat presses, and associated pneumatic components.
Diagnose electrical and mechanical faults and implement corrective actions to minimize equipment downtime.
Assist with equipment installations, upgrades, and process improvements.
Build and maintain tooling as required.

Facilities & Systems Support:

Perform routine facilities maintenance, including cleanrooms and HEPA filtration systems, to ensure a safe and compliant working environment.
Read and interpret technical diagrams, schematics, and equipment manuals.
Maintain accurate records of maintenance activities and report on equipment performance.
Ensure compliance with safety regulations and company maintenance standards.
Collaborate with production and operations teams to support equipment reliability.

Schedule:

Monday-Friday 9am-5pm

Pay:

$50,000-$65,000 per year based on experience
Benefits & Perks:
401(k)
Medical, Dental, and Vision Insurance
Wellness Program
Life Insurance
Short-Term Disability
Corporate-sponsored events
Skill growth and development opportunities
Advancement opportunities
Collaborative environment with energetic and creative problem solvers
A mission worthy of your energy and expertise

]]> Fri, 06 Feb 2026 00:00:00 EST 0 <![CDATA[Accountant]]> We have an exciting new opportunity for an Accountant for a client in Norfolk Virginia!

Qualifications:

Must have Bachelorâs degree in Accounting or Finance
Minimum 4 years of progressively responsible accounting experience, preferably in manufacturing or regulated environments
Experience with accounting software such as QuickBooks and Sage
Must have advanced Microsoft Excel skills with the ability to analyze and interpret data
Strong working knowledge of GAAP and financial reporting
High attention to detail and strong analytical abilities
Strong judgment, critical thinking, and problem-solving skills
Ability to clearly communicate financial matters to non-finance leaders

Job Duties entail but are not limited to:

Financial Reporting & General Ledger:
Own the accuracy and integrity of the general ledger, including journal entries, reconciliations, and month-end close.
Prepare and review balance sheets, income statements, cash flow statements, and supporting schedules.
Ensure financial statements are accurate, complete, timely, and defensible.
Execute monthly, quarterly, and annual close processes with discipline and accountability.

Financial Analysis & Business Insight:

Analyze costs, revenues, margins, commitments, and obligations to support forecasting, planning, and strategic decisions.
Translate operational activity into financial outcomes and explain variances in clear, practical terms.
Proactively identify trends, anomalies, risks, and opportunities and communicate findings to leadership.

Accounting Operations & Compliance:

Lead or review accounts payable and accounts receivable processes to ensure accuracy, timeliness, and cash discipline.
Ensure compliance with GAAP, internal controls, and company accounting policies.
Prepare and support tax filings and ensure compliance with federal, state, and local requirements.
Serve as a key point of contact for internal and external audits, providing clear documentation and explanations.
Drive continuous improvement of accounting systems, processes, and controls.

Schedule:

Monday-Friday 9am-5pm

Pay:

$85,000 per year based on experience
Benefits & Perks:
401(k)
Medical, Dental, and Vision Insurance
Wellness Program
Life Insurance
Short-Term Disability
Corporate-sponsored events
Skill growth and development opportunities
Advancement opportunities
Collaborative environment with energetic and creative problem solvers
A mission worthy of your energy and expertise

]]> Fri, 06 Feb 2026 00:00:00 EST 0 <![CDATA[Executive Assistant]]> We have an exciting new opportunity for an Executive Assistant for a client in Norfolk Virginia!

Qualifications:

Must have a minimum 4 years of experience supporting senior leadership
Must have exceptional organizational and time-management skills
Must have strong written and verbal communication abilities
High level of discretion, professionalism, and sound judgment
Ability to work independently and anticipate needs in a fast-paced environment
Strong problem-solving and critical-thinking skills

Job Duties entail but are not limited to:

Manage complex calendars, scheduling, and meeting coordination.
Conserve executivesâ time by triaging calls, meetings, and correspondence.
Anticipate executive needs by preparing materials, agendas, and resources in advance.
Record meeting minutes, conference notes, and maintain secure documentation systems.
Track deadlines, upcoming events, and action items to ensure timely completion.
Prepare project summaries by researching, reading, and compiling relevant data for executive review.
Review documents for accuracy, completeness, and quality.

Communication & Coordination:

Serve as a trusted liaison between executives, internal teams, and external stakeholders.
Represent the executive office with a polished, professional demeanor.
Handle sensitive information with the highest level of confidentiality and integrity.

Planning & Problem-Solving:

Identify potential challenges and propose solutions proactively.
Manage travel arrangements, itineraries, and expense reporting.
Support personal executive tasks such as travel planning, household coordination, and special projects.
Maintain flexibility to handle ad-hoc requests with discretion and efficiency.

Schedule:

Monday-Friday 9am-5pm
Must be flexible to work outside of normal working hours as well

Pay:

$65,000-$75,000 per year based on experience
Benefits & Perks:
401(k)
Medical, Dental, and Vision Insurance
Wellness Program
Life Insurance
Short-Term Disability
Corporate-sponsored events
Skill growth and development opportunities
Advancement opportunities
Collaborative environment with energetic and creative problem solvers
A mission worthy of your energy and expertise

]]> Fri, 06 Feb 2026 00:00:00 EST 0 <![CDATA[1 CNC Programmer]]> We have a new exciting opportunity for a CNC Programmer in Hampton

Qualifications:

5 to 7+ years of CNC programming experience in a regulated manufacturing environment
Strong knowledge of CNC machining, tooling, feeds, speeds, and multi-axis machining
Proficiency with CAM software (e.g., Mastercam, Fusion 360, GibbsCAM) and G-code
Ability to read and interpret aerospace/defense drawings and GD&T
Experience working under AS9100 or ISO 9001 quality systems
Job Duties Include but are not limited to:
Develop, validate, and maintain CNC programs for mills, lathes, and multi-axis machines in compliance with AS9100 quality standards
Interpret controlled engineering drawings, CAD models, specifications, and GD&T requirements
Ensure CNC programs, setup sheets, and tooling documentation meet configuration control and revision requirements
Support first article inspections (FAI) per AS9102 and assist with validation of machining processes
Select approved tooling, fixtures, and machining strategies to meet material, tolerance, and surface finish requirements
Collaborate with Quality, Engineering, and Production to resolve nonconformances, corrective actions, and root cause investigations
Optimize machining processes while maintaining compliance with customer and contractual requirements
Support internal and external audits, including customer, government, and third-party audits
Ensure programs follow cybersecurity, data control, and export compliance requirements (ITAR/EAR as applicable)
Maintain traceability of programs, revisions, and process changes

Schedule:

Monday-Friday 7am-3:30pm

Pay:

$35.00 per hour to $45.00 per hour

#ISS

]]> Fri, 23 Jan 2026 00:00:00 EST 0 <![CDATA[Machinist]]> We have an exciting new opportunity for a Machinist in Hampton!

Qualifications:

Experience: Minimum 5 yearsâ experience as a CNC Machinist or in a similar role in a manufacturing environment
Technical Skills: Strong knowledge of machine tools and their operation, including lathes, milling machines, grinders, and drills
Blueprint Reading: Ability to read and interpret blueprints, technical drawings, and specifications
Precision Measurement: Experience with precision measurement tools, such as micrometers, calipers, height gauges, and dial indicators
Problem-Solving: Ability to troubleshoot and resolve issues with machine tools, parts, or production processes
Attention to Detail: A high level of precision and accuracy when machining parts to ensure quality standards are met
Mechanical Aptitude: Strong understanding of machining processes and maintenance

Job Duties Include but are not limited to:

Set Up and Operate Machines: Operate and set up a variety of machine tools (e.g., lathes, mills, grinders, drills) to produce high-precision metal or plastic parts.
Read and Interpret Blueprints: Interpret technical drawings, blueprints, and specifications to understand the dimensions and tolerances of the parts to be produced.
Select and Install Tools: Choose the correct cutting tools, speeds, and feeds based on the materials being worked with and the specifications provided.
Measure and Inspect: Use precision measuring instruments (calipers, micrometers, gauges, etc.) to ensure parts meet the required dimensions and tolerances.
Machine Maintenance: Perform routine maintenance and cleaning of machines to ensure proper function. Report any mechanical issues or breakdowns to supervisors.
Quality Control: Inspect finished parts to ensure they meet high-quality standards, performing final checks before parts are sent to assembly or finished product stages.
Modify and Adjust Machines: Adjust machine settings to optimize performance, including correcting or making changes to tolerances during production runs.
Troubleshooting: Identify and resolve machining issues such as incorrect dimensions, tool wear, or machine malfunctions.
Safety and Cleanliness: Adhere to all safety protocols and ensure the work area is clean and organized.
Collaborate with Team Members: Work closely with engineers, supervisors, and other machinists to meet production goals and deadlines.

Schedule:

Monday-Friday 6:00am-2:30 or 7:00am-3:30

Pay:

$30.00 per hour to $38.00 per hour based on experience

#ISS

]]> Wed, 07 Jan 2026 00:00:00 EST 0 <![CDATA[PCMS Tile Installer]]> We have an exciting opportunity for a PCMS Tile Installer position in Newport News Virginia!

Qualifications:

Must have at a minimum Level 1 PCMS Tile Certification
Must have 6 months of verifiable experience with PCMS installation and removal.
Must be local
Must have at least 1 year of shipboard experience.
Must have no criminal record.
Ability to read and interpret technical drawings, installation manuals, and job specifications.
Strong understanding of adhesives, fasteners, and insulation installation techniques.
Familiarity with tools used in tile work such as utility knives, straight edges, tape measures, drills, and adhesives.
Comfortable working in confined spaces, on ladders, scaffolding, and in variable shipboard environments.

Job Duties entail but are not limited to:

Prepares surfaces for the application of PCMS tile.
Knowledge of the processes and procedures necessary for the proper removal of old materials with minimal damage to surrounding materials.
Uses prescribed tools for shaping and fitting sheet and tile type materials using required glues and adhesives.

Schedule:

6am-1:30pm Monday-Sunday
Must be flexible to work OT and weekends as needed

Pay:

$28-30/hour based on experience

#ISS

]]> Tue, 06 Jan 2026 00:00:00 EST 0 <![CDATA[Marine Insulator]]> We have an exciting opportunity for a Marine Insulator position in Norfolk, Virginia!

Qualifications:

Must have a minimum of 2 years of verifiable experience as a Marine Insulator
Must be eligible for DBIDS
Must have OSHA 10
Must have experience working with rubber, kalo, fiberglass, pads and haul boards

Job Duties entail but are not limited to:

Install, remove, repair, and replace thermal and acoustic insulation on piping, machinery, bulkheads, overheads, and ventilation systems aboard ships and submarines
Fabricate and install removable insulation pads, blankets, and lagging systems
Measure, cut, fit, and secure insulation materials including fiberglass, mineral wool, calcium silicate, and foam-based products
Apply vapor barriers, jackets, banding, pins, adhesives, and sealants per specifications
Read and interpret blueprints, isometrics, and technical drawings
Work in confined spaces, at heights, and around active shipyard operations
Safely use hand and power tools associated with marine insulation work
Maintain cleanliness of work areas and properly dispose of insulation waste

Schedule:

6am-1:30pm Monday-Friday
Must be flexible to work OT and weekends as needed

Pay:

$24-25/hour

#ISS

]]> Tue, 06 Jan 2026 00:00:00 EST 0 <![CDATA[Electrician - Commercial]]> Our client in Virginia Beach, VA is looking for Commercial Electricians. You will be joining a team at a quickly growing company that has tremendous job opportunity in an Industrial setting.

Requirements/Qualifications:

4+ years commercial electrical experience preferred
Work 40 hour work week, overtime as required
Some experience diagnosing mechanical problems involving air-conditioning or refrigeration equipment, manufacturing equipment and tools.
Bend Conduits using hand benders, mechanical benders or hydraulic benders Knowledge of the use of power tools, saws, threaders, wire tuggers, knock punches and any tools associated with the electrical industry.
Operate two handed tools/equipment, cable cutters, hammer drills, compression tools, jack hammers and any other tools associated with the electrical industry.

Duties/Responsibilities:

Install new or modified electrical installations consistent with local and national codes.
Plan electrical installations to minimize waste of materials, provide access for future maintenance, and avoid unsightly, hazardous, and unreliable wiring
Follow diagrams, blueprints and interrupt specifications
Application and knowledge of journeyman electrician level skills in the installation and repair of electrical systems and associated activities which may include the application of some mechanical knowledge to diagnose repair needs for air-conditioning and refrigeration equipment, or other equipment as necessary.
Perform any and all work tasks and comply with any work schedules, attendance or duty requirements which may be established by City or Department Rules.
Perform related work as assigned or specified in project drawings, customer specification or project requirement.
Manage the cleanliness and organization of the Electrical Shop and main facility
Some Travel to job sites when needed
Maintain all work sites clean and in order
Demonstrate safe work habits and proper care of equipment and tools
Complete all required paperwork
Work from all types of step ladders, frame ladders and all size extension ladders.
Adhere to all safe work procedures
Attend educational and training classes when required

Hours:

Day Shift: Monday â Friday 8AM until 430PM
Night Shift: Monday â Thursday 5PM â 330AM

Pay:

Day Shift: $20-28/Hour
Night Shift: $23-32.20/Hour

#ISS

]]> Wed, 31 Dec 2025 00:00:00 EST 0 <![CDATA[NDT Inspector]]> QA-NDT Inspector is responsible for conducting, documenting, and maintaining records associated with inspection per customer and contractual requirements. Performs Non-destructive testing in the NDT disciplines they are certified too and document those activities in reports and required forms.

Qualifications:

2-5 yearsâ experience in NDT and Quality Control / Assurance.
Combination of any of the following NDT Certifications; VT, MT, PT and/or UT.
Excellent interpersonal, negotiation, communication and writing skills.
Strong organizational skills
Computer skills including Microsoft Office products.
Related Department of Defense experience including direct experience with government customer relations strongly preferred.
Experience with NAVSEA Standard Items and ISO requirements preferred.
Must be able to get access to Government Facilities

Essential Duties & Functions:

Oversee / monitors inspections then documents inspection results on required forms.
Perform VT, MT, PT and UT inspections as required.
Needs to understand NAVSEA Standard Items and other Government Specifications.
Analyzes documents, drawing, customer requirements and quality procedures to ensure the Company meets the requirements and standards of the customer.
Generate, review and / or submit condition found reports, test and inspection plans, process control procedures, test documents and / or corrective action reports (CAR) as required to document customer requirements or non-conformances.
Inventories and maintains test equipment and gauges.
May be tasked to prepare presentation materials, teaching aids, handouts, etc. and conduct training when warranted.
Perform audits and / or surveillance as needed or assigned.
Work independently to complete responsibilities
Travel to work locations when required, both CONUS and OCONUS.
Must have regular, reliable attendance
Will abide by all Safety Requirements
Other job-related tasks as assigned

HOURS:

First shift starts at 6AM. May work 8,10 or 12 hours shifts.

PAY:

Starts at $24 and could be as high as $34 based on experience and local vs. nonlocal.

#ISS

]]> Thu, 18 Dec 2025 00:00:00 EST 0 <![CDATA[Shipfitters]]> Integrity Staffing has exciting job opportunities for Shipfitters in the Houston, TX area!

Responsibilities:

Primary responsibilities are to perform structural fitting functions with following objectives:
Perform structural fitter assignments as assigned.
Work safe and maintain a safe working environment.
Notify foreman or supervisor of any safety and/or structural issues as warranted.

Duties:

Lays out, positions, aligns and fits together fabricated structural steel plate according to customer specifications and direction from Foreman/Supervisor.
Required to move parts into position, manually, by hoist or crane, and align parts, using jacks, etc.
May be required to remove high spots and cut bevels, using hand files, portable grinders, and/or cutting torch, as well as give directions to the welder to build up low spots or short pieces.
May, at times, be required to tack weld, as necessary.
Consults with foreman or supervisor regarding installation or repair problems, sequence of operations, and time required to complete repair and/or installation
Attend safety meetings as required
Maintain a safe working environment
Other duties as assigned

Education, Experience and Training:

Minimum one year experience as a structural fitter (shipyard experience preferred, but not required)
Be able to perform simple paper work as required for filling out forms and logs.
Special Requirements/Knowledge, Skills and Abilities:
Mandatory drug testing prior to employment, and will be subject to random, unannounced drug and/or alcohol tests during employment.
Must be able to communicate and take directions from Foreman & Supervisor.
Must have good judgment skills, and a high-level work initiative;
Must be able to work independently, without direct supervision;
Must be able to meet strict attendance requirements

Physical/Environmental Requirements:

Barge chemical environment. Requires prolonged kneeling, standing, walking, twisting, climbing, and the ability to lift and carry in access of 120 lbs, assisted.
Ability to work in varied conditions (i.e.: heat, cold, rain, ice, snow, etc.), inside and outside.
Able to work in confined space, heights and operate equipment efficiently and safely.

#I08

]]> Wed, 29 Oct 2025 00:00:00 EDT 0 <![CDATA[Painter/Blaster]]> Integrity Staffing has exciting new opportunities for Shipyard Sandblaster/Painters in the Houston, TX area!

Roles & Responsibilities:

Sandblast barge & boat repair areas, internal compartments & cargo tanks, and external surface areas, and clean/remove blasting material residue from those surfaces in preparation for painting.
Paint barge & boat repair areas, internal compartments & cargo tanks, external surface areas, and specialty components & areas with the required number of coats and coverage.
Operate equipment, vacuum pumps, air pumps, compressors, blowers, meters, hoses, etc., to accomplish sandblast & paint duties.
Must have experience using 2 inch hose, #7 Nozzle, blasts with 120 PSI, and uses airless sprayer.

Qualifications and Education Requirements:

Must have 1-3 years experience Painting and Sandblasting in an Industrial Manufacturing environment.
Be able to perform simple paperwork as required for filling out forms and logs.
The employee frequently works near moving mechanical parts and regularly works in outside weather conditions.
Walking, stepping, climbing, or otherwise moving from one location on the job site to another, which may be of varying heights and access parameters.
Standing, stooping, bending, crouching, kneeling, squatting, climbing, or sitting for long periods of time.
Repetitive movements by feet, shoulders, arms, wrists, hands, and back in the performance of work.
Climbing vertical ladders of a height of 6ft or greater.
Working in confined work areas and/or elevated heights.
Frequent lifting and carrying of objects and the ability to lift and carry in excess of 120 lbs. with assistance.
Adapting to temperature changes, outdoor conditions, and prolonged exposure to dusty, wet, or humid conditions, loud noises, and vibration.

Schedule:

Monday-Sunday 6am-3:30pm and 3:30pm-12am (midnight)
Monday-Sunday 5am-2:30pm and 3:00pm-1am

Pay: $17-$22/hour

#I08

]]> Wed, 29 Oct 2025 00:00:00 EDT 0 <![CDATA[Radiography Testing Inspector 2]]> We have an exciting opportunity Radiography Testing Inspector 2 in Newport News, VA with one of our Clients in Shipbuilding Industry.

Qualifications:

Must have TC1A Qualifications. Having 250-1500 qualifications would be a plus

DUTIES AND RESPONSIBILITIES:

Must be able to pass hair follicle drug test
Must have TC1A Qualifications. Having 250-1500 qualifications would be a plus.
Blueprint reading
All inspectors shall have documented qualification/certification to the Level II requirements of ASNT SNT-TC-1A, 2016 Edition
RT inspectors must have passed and have documentation of certification of IRRSP from an approved entity
Inspectors shall have passed written general theory, procedure specific and practical examinations for RT inspection piping, casting and or structure welds
Specific examinations cover the equipment, operating procedures and test techniques that candidates may encounter in their specific assignment.
Specific examination also covers the specifications, codes and acceptance criteria used in the applicable NDT procedures. Practical examination covers inspection performance of X-ray and Gamma radiography.

Hours:

1st Shift â Starts at 6AM â may work 8,10 or 12 hour shifts
2nd Shift â Starts at 3PM â may work 8, 10 or 12 hour shifts
3rd Shift â Starts at 10pm- may work 8, 10 or 12 hours shifts

Pay:

Non-Local: Up to $36-$46 depending on experience + $135 Per Diem

#ISS

]]> Thu, 23 Oct 2025 00:00:00 EDT 0 <![CDATA[Pipefitter]]> We have a wonderful opportunity for a Pipefitter in Newport News, VA with one of our Clients in the Ship Repair Industry.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

Must be able to pass hair follicle drug test
Read and interpret ship piping drawings
Experienced fitting carbon steel, CRES, and copper nickel piping
Ability to end prep piping by hand and/or with Wach or Portsmouth Machine
Knowledge in installing pipe hangers
Ability to read a ruler using inches and tenths
Prep and fit-up backing rings
Clean cut/break pipe with a grinder
Ability to hand prep V bevels
Experience in fabrication of various details and assemblies from drawings
Bend pipe from template and in the use of a hand bender
Must be able to fit brazed joints with/without insert ring
Prep and fit-up backing rings

HOURS:

1st Shift-7am-3:30pm
2nd Shift-3:30pm-12:00Am
3rd Shift- 10:00pm-6:00am
Must be open to all shifts

PAY:

$29.50/Hour based on experience; Per Diem is offered for Non-local

#ISS

]]> Fri, 03 Oct 2025 00:00:00 EDT 0 <![CDATA[Large Machinist I/S Marine-Offsite]]> We have a wonderful opportunity for Inside Machinist Large equipment operator in Newport News, VA with one of our Clients in the Ship Repair Industry.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

Experience with Horizontal Boring Mills, HBMâs will have travel that are in the range of X - 500”, Y - 250”, Z - 50” and W - 65” they will also have turn tables that are about 10â square with a load capacity of 100 tons
Vertical Turning Centers, VTCâs will have tables that are roughly 80” in diameter with a 20 ton table capacity. X total travel will be about 160” and Z will have 80” of travel.
Gantry Mill experience
Be able to look at blueprint drawings and set the best average
Manuel Machine experience
Experience with 10ft lathe machine

HOURS:

1st Shift-7am-3:30pm
2nd Shift-3:30pm-12:00Am
3rd Shift- 10:00pm-6:00am

Must be open to all shifts

PAY:

$37.50-$45/Hr depending on location-Per Diem is offered for Non-local

#ISS

]]> Thu, 25 Sep 2025 00:00:00 EDT 0 <![CDATA[Machinist I/S Marine]]> We have a wonderful opportunity for Inside Machinist Large equipment operator in Newport News, VA with one of our Clients in the Ship Repair Industry.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

Experience with Horizontal Boring Mills, HBMâs will have travel that are in the range of X - 500”, Y - 250”, Z - 50” and W - 65” they will also have turn tables that are about 10â square with a load capacity of 100 tons
Vertical Turning Centers, VTCâs will have tables that are roughly 80” in diameter with a 20 ton table capacity. X total travel will be about 160” and Z will have 80” of travel.
Gantry Mill experience
Be able to look at blueprint drawings and set the best average
Manuel Machine experience
Experience with 10ft lathe machine

HOURS:

1st Shift-7am-3:30pm
2nd Shift-3:30pm-12:00Am
3rd Shift- 10:00pm-6:00am

Must be open to all shifts

PAY:

$37.50-$45/Hr depending on location-Per Diem is offered for Non-local

#ISS

]]> Thu, 25 Sep 2025 00:00:00 EDT 0 <![CDATA[Pipe Welder]]> We have an exciting opportunity for a local/Nonlocal Pipe Welder position in Newport News, VA with one of our Clients in the Ship Repair Industry.

Qualifications

Multi-pass. All position fillet and butt welds using the SMAW (Shielded metal arc) process
Ability to fuse inserts and weld carbon steel, stainless steel and copper nickel pipe using the SMAW and GTAW (Gas Tungsten Arc Welding) processes
Mirror welding using SMAW and GTAW
Use fillet gauges, butt gauges, and a six-inch scale
Heating oxygen/propane heating
Ability to fuse inserts and weld carbon steel, stainless steel and copper nickel pipe
Must be able to pass hair follicle drug test

Hours:

Must be open to all 3 shifts

Pay:

$50 Hr
$135 Per diem if you qualify

#ISS

]]> Wed, 17 Sep 2025 00:00:00 EDT 0 <![CDATA[Structural Welder]]> Job Duties/Qualifications:

3+ yrs. experience welding in Shipyard/Industrial environment
Must be able to test and qualify with SMAW, GMAW and FCAW welding processes in the 2G, 3G and 4G positions
Must have own basic welding tools
Work consists of welding foundations, bulkheads, shell plate, etc. - new Construction
Ability to read welding symbols, perform basic math and use fillet & butt weld gauges
Able to set-up, tear down and operate Oxygen/Propane torch equipment
Must be U.S. citizen with CLEAN BACKGROUND and able to pass a hair follicle Drug Test
Long Term Assignments Available (Up to 2 years)
ACA Health Insurance Benefits Available
Per Diem Available for Those Who Qualify

Requirements:

• Must be at least 18 years of age

• Pass background check and urinalysis

• Strong Work Ethic

• Must be able to lift 50lbs

• Willing to work on/around ships

We Offer:

• Weekly Pay

• Overtime available

• Long term projects

Benefits:

• Vacation & Holiday pay

• Health Insurance

• Attendance Bonuses

#ISS

]]> Thu, 28 Aug 2025 00:00:00 EDT 0 <![CDATA[Shipfitter - Advanced]]> Job Description/Requirements:

Must have 4 years commercial/naval experience as a first class Shipfitter.
Multi-Pass Tack Welding.
Burning-Oxygen/Propane Burning Torch, Heating-Oxygen/Propane Heating Torch.
Comprehend complex structural assembly drawings, blueprints, and sketches to include weld symbols, material types, datum and reference lines.
Understand fractional dimensions as with the use of a ruler, layoff piece parts for fabrication and assembly, assemble structural piece parts in accordance with specifications in a quality manner, use Molded Lines and Ship Reference Lines to execute required work.
Use vibratory tools:
Grinders
needle guns
Air Carbon Arc Gouging.
Ability to Erect, Set and Makeup Complex-shaped Shell Plates, Decks, Bulkheads, Longitudinals, trunks
Install and Replace Hull Inserts and Penetrations
Must be able to climb up and down vertical ladders, bend, squat, kneel, work in confined spaces & around moving equipment.

Requirements:

Must be at least 18 years of age
Pass background check and urinalysis
Strong Work Ethic
Must be able to lift 50lbs
Willing to work on/around ships

We Offer:

Weekly Pay
Overtime available
Long term projects

Benefits:

Vacation & Holiday pay
Health Insurance
Attendance Bonuses

#ISS

]]> Wed, 13 Aug 2025 00:00:00 EDT 0 <![CDATA[Sheet Metal Mechanic]]> Experience:

Three years of experience as a first class Sheet Metal Worker in the installation of foundations, ventilation, bulkheads, shipboard furniture and sheet metal fabrication shop work. Marine experience preferred
Aircraft/Industrial/Commercial sheet metal experience is acceptable

Required Skills:

Comprehend complex ventilation assembly drawings, blueprints, and sketches to include weld symbols, material types, datum and reference lines.
Ability to comprehend fractional and decimal dimensions as with the use of a ruler.
Layoff piece parts for fabrication and assembly
Ability to assemble piece parts in accordance with specifications in a quality manner
Experience working in a physically demanding environment
Familiarity with OSHA regulations relative to the shipbuilding industry
Experience using small hand tools (electric drills, grinders, rivet guns), and shop equipment (drill press, press break, Shears etc.).

Requirements:

• Must be at least 18 years of age

• Pass background check and urinalysis

• Strong Work Ethic

• Must be able to lift 50lbs

• Willing to work on/around ships

We Offer:

• Weekly Pay

• Overtime available

• Long term projects

Benefits:

• Vacation & Holiday pay

• Health Insurance

• Attendance Bonuses

Pay starting at $27.31/hour

Per diem available to those eligible

#ISS

]]> Wed, 13 Aug 2025 00:00:00 EDT 0